Guide To P0244 OBD Error Code Solutions

<<See All OBD Codes

The P0244 fault code can be described as Turbocharger Wastegate Solenoid A Circuit Range/Performance. It means that the PCM has detected an unusual reading in the turbocharger wastegate solenoid A circuit.

P0244 is a generic code which would start appearing when the engine control module would detect the turbocharger wastegate solenoid A input circuit range or performance is out of specifications when it is compared to the turbo boost sensor, barometric pressure sensor or the manifold pressure sensor at the idle.

What causes this problem with the Turbocharger Wastegate Solenoid A Circuit Range/Performance?

• The turbo boost pressure or MAP sensor might be registering pressure in the intake manifold at idle, which would indicate that the wastegate did not bypass all the boost pressure quick enough, or all the way
• The wastegate solenoid ground side might have an intermittent short on the control side, which can cause loss of solenoid control
• The turbocharger wastegate solenoid can be stuck on, which can cause boost pressure in the intake manifold

1. Turbocharger - A faulty Turbocharger can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Engine Control Module - If everything is alright with Turbocharger, then there is surely some defect in Engine Control Module. Get it replaced before the situation gets worse.
3. Turbo Boost Pressure Sensor - P0244 code can display due to some issues in the Turbo Boost Pressure Sensor. So, it is very important to replace the Turbo Boost Sensor with us at equitable prices.
4. Manifold Absolute Pressure Sensor - Do you remember when was the last time you got your car Manifold Absolute Pressure Sensor checked up? A faulty Manifold Pressure Sensor can cause a lot of issues like displaying P0244 code.
5. Wastegate Solenoid - Are you facing some faults in your Wastegate Solenoid? Don’t worry and get them replaced or else P0244 code can turn up.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0244 here:

Common Symptoms

• The check engine light can start flashing up and the code is set in the memory of the engine control module
• The engine may lack some power during acceleration if the solenoid has an intermittent short or open circuit
• The engine turbo boost might be erratic and may cause engine to run rough or stall at idle

Looking out for some ways with the help of which you can correct this fault code? Then have a look below:

• You must replace the wastegate solenoid that is leaking vacuum at idle
• Clean or replace the corroded wiring connections to the solenoid

Parts Avatar Canada endeavours to fulfil all the needs of its consumer, that’s why we have a huge collection of top-quality turbo boost, transmission slipping, boost controller and many more at equitable prices. We won’t let you down in any way.

Here are some steps which you should follow in order to diagnose this fault code:

• You must scan the codes and documents the freeze frame so that you can verify the issue
• The next step would be to clear the DTC codes to verify whether the concern comes back
• The operation of the wastegate solenoid should be checked to see if it is capable of controlling vacuum to the wastegate leaking of vacuum when closed
• Any corrosion in the solenoid connection should be checked that can cause intermittent solenoid control problems
• All the vacuum lines should be inspected to and from the solenoid to the wastegate
• Verify that the wastegate is not sticking or binding

Common Mistakes When Diagnosing The P0244 Code

• You must verify that there are no codes for the boost pressure sensor present, and if they are present , then you should repair them first
• Check that the wastegate is not stuck partly open or sticks when actuated