Guide To P0195 OBD Error Code Solutions

<<See All OBD Codes

Usually this OBD code P0195 is indicated by Check Engine Light. Other than that, the affected drivability, engine performance declining and engine temperature increasing are some common symptoms.

OBD Code P0195 is defined as Engine Oil Temperature Sensor Malfunction.

Engine Oil temperature is important as excessive/increased temperature can lead to burning, engine overheating, and loss of lubrication. The engine control module (ECM) uses the engine oil temperature (EOT) sensor to monitor oil temperature whose signal is also utilized by the instrument cluster if the vehicle is equipped with an oil temperature gauge or oil temperature warning light. If the ECM detects a problem with the EOT signal, it will set a diagnostic trouble code (DTC) in system memory and illuminate the malfunction indicator lamp (MIL). It is also important to know that this code can also set up in the oil coolers are not functioning properly and are needed to be checked first, before diagnosing the sensor or the circuit.

What causes the problem of Engine Oil Temperature Sensor Malfunction?

• Faulty Engine Oil Temperature (EOT) sensor
• Problems with the EOT circuit and wiring
• Faulty powertrain control module (PCM)
• Engine Oil Cooling system malfunction

1. Engine Oil Temperature Sensor - If this sensor becomes faulty, the engine can suffer major damages and cost hefty repairs. Replace it immediately.
2. Powertrain Control Module - Check if the PCM works properly or needs reprogramming and replacement. Find quality parts with us.
3. Cooling System - Check for faults in the cooling system and hardware before inspecting the sensor and circuit. Replace faulty cooling system parts now!
4. Oil Temperature Gauge - Replace faulty gauge that might be showing wrong readings leading to misdiagnosis. Buy quality parts from us.
5. Engine Temperature Sensor Connector - Faulty sensor connectors will not give correct information to the PCM and cause the P0195 error to get stored in the memory. Replace them now!
6. Diagnostic Tools - Use quality diagnostic tools to treat the OBD code P0195 error. Buy factory grade products from us.

The major symptom is the Check Engine Light being illuminated along with other problems like increased engine temperatures and performance issues. The EOT detects the problems with the vehicle and if the circuits of the EOT system has problems, it will be unable to monitor the oil temperature.

It is important to know the components responsible for flashing of OBD code P0195 by the PCM. These components or problems are needed to be resolved by repairing or replacing them as required.

• EOT sensor replacement
• Repair/replace damaged wiring to the EOT sensor circuit
• Sensor connector replacement
• PCM replacement
• Cooling system issue resolving

At PartsAvatar Canada, find quality solutions to all your OBD code error problems with best parts for every make and model from the best brands. Explore now for best deals.

• Begin your diagnosis by visually inspecting all wiring and connectors in association to the sensor and the circuit.
• Look for shorted or burned wiring and replace circuitry and connectors as required.
• If the system wiring, connectors, and components appear to be in normal working order, connect the OBD scanner to the diagnostic connector and record all stored trouble codes and freeze frame data.
• This information can be extremely helpful in diagnosing intermittent conditions that may have contributed to this code being stored.
• Clear all the codes, and test run the vehicle to see if the code returns or not. If the code fails to immediately return, you may have an intermittent condition.
• Intermittent conditions can prove to be quite difficult to diagnose and in extreme cases may have to be allowed to worsen before a correct diagnosis can be made. Some engines are equipped with an oil temperature sensor which provides the PCM with the correct data as to what is the problem.
• Check for the voltage wire (typically it is a 5-volt reference signal) and a ground wire and if they are in correct range, check for PCM faults. Although rare in nature, the PCM might require replacement or reprogramming.

Common Mistakes When Diagnosing The P0195 Code

It is important for the technician to know the problem and the root cause first, before starting the diagnosis. Always check for cooling system first and then inspect the sensor and circuit. Also, don’t forget to check the wiring and connections to the sensor and circuit respectively and joining each other and to the PCM.

• Replacing the sensor without checking the wiring going to and from the EOT sensor.
• Failing to check the reference voltage the PCM provides to the sensor.
• Not noticing the problems with the cooling system that can mimic the data that sets this code.