P0132 - OBD Trouble Code

<<See All OBD Codes

If you find out that the P0132 fault code has been stored by the powertrain control module, then it would indicate that there is some problem with the oxygen sensor. The issue would arise because the oxygen sensor might have stayed for a very high voltage for a long period of time without switching back.

The P0132 fault code can be defined as the oxygen sensor circuit high voltage bank 1 sensor 1. This is a trouble code which would highlight the issue in the O2 sensor circuit. This code would start indicating that the sensor has lagged or take longer period of time to switch from high to low voltage for too long.

It is very important to correct this error code due to the fact that a malfunctioning cylinder would lead to a spike in the fuel consumption. A car whose cylinder is in bad working conditions would emit a number of harmful gases like hydrocarbons and nitrogen oxides that would pollute the environment.

What causes this problem with the o2 Sensor Circuit High (Bank 1 Sensor 1)?

• There can be a short in the heater circuit of the oxygen sensor bank 1 sensor 1
• The oxygen sensor wires might be broken or exposed
• There might be excessive high fuel temperature

1. Oxygen Sensor - OBD Code P0132 can flash if the Oxygen Sensor is damaged. You must replace it with a brand new one online with us.
2. Mass Air Flow sensor - Is your Oxygen Sensor perfectly correct, but still seeing P0132 code? Then there is definitely some issue with the Mass Air Flow sensor.
3. Manifold Absolute Pressure sensor - Did your mechanic just found out that there is some fault in the Manifold Absolute Pressure sensor? Buy top notch Manifold Absolute Pressure sensor from us at economical prices.
4. Exhaust Parts - Everything is fine with the engine control module and still OBD code P0132 flashing? Then there is definitely some fault with the Exhaust parts. Get it checked and replace if needed.
5. Powertrain Control Module - Faulty Powertrain Control Module can cause a lot of issues like displaying P0132 trouble code. Thus, replace it immediately.
6. Engine Control Module - OBD Code P0132 can flash if the engine control module is damaged. You must replace it with a brand new one online with us.
7. Fuel Pump - Fuel Pump is an important car part which should never be neglected. May be there is some fault in it due to which P0132 code may start flashing.

For us our customers are everything, and that’s why we will help you to diagnose P0132 code by mentioning some important symptoms below:

Common Symptoms

• There can be an illumination of the check engine light
• Your vehicle may idle or start running roughly
• There can be an overall decrease in the fuel economy
• The car engine may die
• Black smoke can start coming out of the exhaust or the exhaust can smell bad
• There are no adverse conditions noticed by the driver in uncommon cases

Learn the ways with which you can correct this trouble code:

• The broken or exposed wires should be repaired or replaced
• You must replace the oxygen sensor bank 1 sensor 1

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of connection, catalytic converter, fuel pump and a lot more. We are sure that now all your issues would be resolved.

A record of freeze frame data should be taken and at the same time all trouble codes that have been stored by the power control module, this can be done by using an OBD-II scanner

The next step is to clear the P0132 trouble code due to which the check engine light would be turned off

The vehicle should be taken out for a test drive to see if the trouble code and check engine light comes back on

An OBD-II scanner should be used to view live data and monitor the voltage levels going to the oxygen sensor to ensure proper voltage

Carefully check the oxygen sensor wiring for broken or exposed wires

Common Mistakes When Diagnosing The P0132 Code

• There can be some defects in the oxygen sensor/air fuel ratio sensor
• The oxygen sensor/air fuel ratio sensor heater circuit might be defective
• There can be some faults in the mass air flow sensor
• High fuel pressure
• Imperfect engine coolant temperature sensor
• There can be some issues with the sensor wiring or the circuit
• The powertrain control module software needs to be updated
• Flaws in the powertrain control module