P005D OBD Error Code: Problem & Solutions

<<See All OBD Codes

There are a lot of reasons due to which P005D trouble code may start displaying. A few of them include problems with the engine control module, defective camshaft sensor, some sort of faults in the Camshaft Variable Timing Solenoid. It is very important to take care of these parts or else a situation would arise where Generic Code P005D would start flashing up.

First of all, this code is related to the camshaft profile which is the overall shape as well as depicts the roundness of the lobe on the camshaft. You might be wondering what is the meaning of “B” in the code description, so this “B” here refers to the camshaft which is the in charge of opening the exhaust valves. The side of the engine is the Bank 2 and there are chances that sometimes the engine is inline, so it means that it has only 1 bank. Whenever there would be an issue with the camshaft profile control circuit, then the PCM would flash up a trouble code.

What causes this problem with the Camshaft Profile Control Stuck?

• Issues with the Engine Control Module
• A defective timing belt or timing chain
• Faults with the camshaft sensor
• Some sort of problems with the crankshaft sensor
• Defects in the Camshaft Variable Timing Solenoid
• Camshaft Variable Timing Solenoid harness may be open or shorted
• Bad electrical connection Camshaft Variable Timing Solenoid circuit

1. Timing Chain - Is your timing chain damaged or broken? Don’t worry as we have solutions for all your problems.
2. Timing Belt - Defective car timing belt can be a major reason why P005D code depicts. So, make sure to replace it online so that you don’t have to face any further issues.
3. Crankshaft Sensor - Everything is okay with the timing chain and still OBD code P005D triggering? Then there must be some defects in crankshaft sensors. Replace them as soon as possible.
4. Camshaft Sensor - Issues with camshaft sensors can be irritating and its best to replace them. We have a huge variety of camshaft sensors available for our dear customers.
5. Camshaft Variable Valve Timing Control Solenoid - Some sort of defects in the Camshaft Variable Valve Timing Control Solenoid can be a huge reason behind the appearance of P005D code. So, you must get it fixed.
6. Electronic Control Module - Damaged Electronic Control Module can give rise to P005D OBD code. Buy it online from us at equitable prices.
7. Powertrain Control Module - P005D code flashing? Get your Powertrain Control Module inspected from a mechanic.
8. Multimeter - Searching for a new multimeter? Say no more! Visit us to purchase top notch multimeters online.

Common Symptoms

• Decrease in power
• Bad drivability
• The fuel economy may start decreasing
• Unusual response by throttle
• Reduced amount of efficiency
• Altered power bands

• Try to reset the fault codes and then you should perform a road test
• computer codes should be carefully checked and then documents the freeze frame data for the code
• To check if the codes would come back or not, test the vehicle
• It is very important to correct the resistance and for that OCV should be checked. It should be approximately 6.9 to 7.9 ohms
• You can always trace and repair if there are any shorts or open circuits in the wiring

However, if you face any issue then visit us. We have stocked a wide range of best priced PCM, Exhaust System, Supercharger and a lot more to help you out in fixing your car.

The first and the foremost thing which you should do is to check the overall integrity of the oil which is currently being used by your engine. If the level of the oil is OK, then the next step is to check if the oil is clean or not. You must replace the oil as well as filter if it is dark in colour. It is very important to check and maintain an oil schedule. The oil can slowly and gradually become contaminated if the oil is not maintained properly, so it is very important to take care of this. The main reason behind this is that the oil which already has a lot of dirt and debris accumulated in it would cause malfunctions in camshaft profile control system. Various forms of malfunctions can also be caused in divergent engine systems by sludge, which would arise if there is lack in oil maintenance.

Always refer to the service manual to check your schedules as it is a chief point. Carefully find the harness, wires as well as connectors which are utilized in camshaft profile control circuit. Then you have to aid in wire identification and for that you will have to discover a wiring diagram. You can find them in the vehicle’s specific service manual. Then examine the wires and harnesses to check if there are any signs of damage or wear. One must also inspect the connections at the connector. The connectors can become loose because of broken tabs.