Error Code P005C: What It Means & What To Do?

<<See All OBD Codes

It can be very troublesome if out of a blue moon you start facing problems with your engine control module, your car mechanic telling you to replace your timing belt/chain or watching bad electrical connection in Camshaft Variable Timing Solenoid circuit. There are chances that the Generic Code P005C would soon flash up.

First of all, this code is related to the camshaft profile which is the overall shape as well as depicts the roundness of the lobe on the camshaft. You might be wondering what is the meaning of “B” in the code description, so this “B” here refers to the camshaft which is the in charge of opening the exhaust valves. The side of the engine is the Bank 2 and there are chances that sometimes the engine is inline, so it means that it has only 1 bank. Whenever there would be an issue with the camshaft profile control circuit, then the PCM would flash up a trouble code.

What causes this problem with the Camshaft Profile Control Performance?

• Issues with the Engine Control Module
• A defective timing belt or timing chain
• Faults with the camshaft sensor
• Some sort of problems with the crankshaft sensor
• Defects in the Camshaft Variable Timing Solenoid
• Camshaft Variable Timing Solenoid harness may be open or shorted
• Bad electrical connection in the Camshaft Variable Timing Solenoid circuit

1. Timing Chain - Are you facing OBD Error Code P005C? Don’t worry as you can fix this issue with new timing chain. We care for our customers, that’s why we have timing chain for every make and model.
2. Timing Belt - Timing Belt is an important car part which should never be neglected. May be there is some fault in it due to which P005C code may start flashing.
3. Crankshaft Sensor - Timing Chain is perfectly fine but still but having that trouble code P005C flashing? In such a situation your crankshaft sensor might be faulty. Why don’t you think of getting that replaced?
4. Camshaft Variable Valve Timing Control Solenoid - Sometimes P005C error code can come because the camshaft variable timing solenoid harness is open or shorted So it would be a nice decision to replace it now.
5. Engine Control Module - Do you remember when was the last time you got your car engine control module checked up? A damaged engine control module can cause a lot of issues like displaying P005C code.
6. Powertrain Control Module - P005C code does not really end up spoiling your timing belt, but it might also accompany few powertrain control module issues. We have best powertrain related parts with us.
7. Multimeter - It can be very problem some if OBD code P005C keeps on triggering. Visit us to purchase best multimeter online. 

Willing to know some common symptoms of OBD Trouble Code P005C? Your wish is our demand. Have a look at them below:

Common Symptoms

• Overall decrease in power
• Bad drivability
• Decrease in the amount of fuel economy
• Unusual response by throttle
• Reduced amount of efficiency
• Altered power bands

Learn the ways with which you can correct this trouble code:

• Try to reset the fault codes and then you should perform a road test
• computer codes should be carefully checked and then documents the freeze frame data for the code
• To check if the codes would come back or not, test the vehicle
• It is very important to correct the resistance and for that OCV should be checked. It should be approximately 6.9 to 7.9 ohms
• You can always trace and repair if there are any shorts or open circuits in the wiring

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of Powertrain ControlModule, Timing Belt, Throttle Position Sensor and a lot more. We are sure that now all your issues would be resolved.

The first and the foremost thing which you should do is to check the overall integrity of the oil which is currently being used by your engine. If the level of the oil is OK, then the next step is to check if the oil is clean or not. You must replace the oil as well as filter if it is dark in colour. It is very important to check and maintain an oil schedule. The oil can slowly and gradually become contaminated if the oil is not maintained properly, so it is very important to take care of this. The main reason behind this is that the oil which already has a lot of dirt and debris accumulated in it would cause malfunctions in camshaft profile control system.

Various forms of malfunctions can also be caused in divergent engine systems by sludge, which would arise if there is lack in oil maintenance. Always refer to the service manual to check your schedules as it is a chief point.

Carefully find the harness, wires as well as connectors which are utilized in camshaft profile control circuit. Then you have to aid in wire identification and for that you will have to discover a wiring diagram. You can find them in the vehicle’s specific service manual. Then examine the wires and harnesses to check if there are any signs of damage or wear. One must also inspect the connections at the connector. The connectors can become loose because of broken tabs.