Dodge Ram 1500 Suspension Parts

Wheels are held by the suspension in direct contact with the ground for stability, turning, and braking, which enable the transfer of power to the ground, increasing balance and control. Springs in the suspension system help to handle bumps and shock absorbers are used to manage the movement of the springs. There are many types of suspension systems and can be categorized into solid (beam) suspension axles and independent suspensions. In the case of a solid axle suspension, the wheels on either side of the automobile are bound by a rigid axle frame, and the bump in the road which affects one wheel will also affect the wheel on the other side. Solid axles can be live axles that transfer the power to the wheels or dead axles like the rear axle on the front-wheel drive. As the term suggests, independent suspensions would allow the wheels to travel independently of each other. The impact of a bump on the road experienced by a single wheel will be confined to that wheel, and the wheel which is present on the other side of the automobile would not be influenced. Either a strut or a shock absorbers is used in the independent suspension. A strut is a shock absorber, which is many times used as a suspension aid. MacPherson strut is the most common type of strut suspension which comprises a shock absorber, spring, and suspension in one unit. When used at the front of the automobile, the upper steering pivot is at the top of the strut. Shock absorbers are utilized for the stabilization of the control arm. The most widely used suspension components are the Shocks and struts. Since they deteriorate steadily and reduce handling and ride efficiency, it is advised that they must be replaced after 50,000 miles. A worn-out suspension can cause a bouncy ride, a nosedive while accelerating, and a lot of body roll in turns.

The oldest type of suspension springs are the leaf springs and are generally used to suspend live axles. They are utilized in automobiles for hauling and carrying huge loads, and their capacity can be increased by adding more leaves to the springs. The most famous types of spring used today are the Coil springs. They are much easier to tune for particular riding and/or handling, which makes them suitable for performance vehicles. A torsion bar is a spring that twists in response to the movement of the wheel. The benefit of torsion bars is that they can be adapted to correct the ride height of the automobile. Compressed air is used by the air suspension springs to ensure a smooth ride and they are equipped with suspension leveling and self-leveling sensors which provide a ride height signal to the air suspension control module. The wheels, springs, and shocks, and struts are attached to the automobile using control arms. Control arms are called by different names like short and long arms, radius arms, and trailing arms, depending on the suspension systems. Generally, they are made up of stamped steel or aluminum and are articulated by means of bushings and ball joints. The control arms are extremely durable and are replaced when bent, but the bushings and ball joints wear and need replacement to mitigate play that can affect the handling and alignment angles. If there would be incorrect alignment angles, then it can cause tire pull and tire wear. If there would be inadequate traditional methods of adjustment, the alignment kit can provide angles within the specification. The connecting point for the front wheel, the suspension, and the steering link is the steering knuckles. The wheels are attached to spindles that form an integral part of the knuckle. Ball joints enable the knuckles to move up and down with the suspension movement and then pivot in response to the steering input. Panhard rods and track bars are situated laterally within the body of the automobile and avoid side-to-side motion. Sway bars are torsion bars that link the wheels on both sides of the automobile to minimize the body roll.

If the suspension parts are faulty, then the vehicle will make noise and start pulling towards one side. PartsAvatar offers the largest array of suspension parts to solve all your auto parts needs and offers parts from famous brands and manufacturers, to make sure you get top quality parts. We also offer the lowest prices in the market and free delivery* options as well. We deliver all parts from our fulfillment centers situated across Canada in places like Vancouver, Edmonton, Montreal, and Toronto.

Are you looking for suspension parts at a good price? No matter what the suspension parts requirements are, we’re ready to help you out. We at PartsAvatar have a wide range of suspension parts in stock, specific to each car. If you need one for your car, then all you need to do is to choose your car year, make and model from the menu at the top left. If you have a preference for a specific manufacturer, you can also make a selection for it. You can also find the correct part in the search bar. Once you are sure that you have made the selection for the right fitment, then you can choose the respective part you need and make a final purchase.

PartsAvatar brings you the auto parts at the best prices without compromising on quality brands. We source our parts from famous and leading brands, for example, Mr. Gasket, Crown Automotive Jeep Replacement, and many more. We offer handpicked quality suspension parts to ensure that we have only the top manufacturers in each line of auto parts. Now there is no need to do a trade-off between a premium quality part and the one that is fairly priced. All parts come with specific brand warranties and even claim to be superior to OEM parts!