P3448 - OBD Trouble Code

<<See All OBD Codes

If you are troubled by your vehicle’s low engine performance or excessive fuel consumption accompanied by engine misfires then now is the time to get your vehicle’s cylinder 6 exhaust valve control circuit checked. Chances are that your PCM has set one of these obd error codes - P3448, P3445, P3446 or P3447.

Eager to know more about this error code P3448? Well, this is an error code that will be set by the ECM/PCM when it senses that cylinder 6 exhaust valve control circuit has too high or outside the normally expected voltage or resistance. This might result in engine misfires and few other problems. To know about few of its common causes, have a look at the section below.

What causes this problem with the Cylinder 6 Exhaust Valve Control Circuit High?

• Non-operative variable valve timing solenoid
• Low engine oil or pressure level
• Blocked oil passage
• Corroded, loose or damaged wiring and connectors
• Faulty engine control module

1. Engine Control Module - Engine control module of your vehicle is your vehicle’s engine computer. If it happens to be damaged or corroded then it can lead to creating a short within the ECM, or corrosion can enter the ECM and then move to the wiring harness. This can happen even when being exposed to a wide range of elements when the car is in certain environments. If you are looking for Engine Control Module to fix this error code P3448 then have a look at our collection. You will easily find one for your vehicle make & model.
2. Exhaust Valve - OBD error code P3448 flashing? It's time to replace those damaged exhaust pressure control valves now. Buy new ones with us today.
3. Powertrain Control Module - Error code P3448 flashing? Yes? Then you must check for PCM error which might be due to circuit faults that might require complete replacement and reprogramming. Replace it now!
4. Valve Timing Solenoid - If you are facing obd error code P3448, then you will most probably need to fix and replace your valve timing solenoid at the earliest. Wondering where to find them? Well, nowhere else than PartsAvatar.
5. Engine Oil - Considering that P3448 error can be caused if you use incorrect or contaminated oil, changing it to a new one might solve your problem. With us you can find all specifications and types of engine oil.

Next important thing you need to know about are the common symptoms for this obd error code P3448 with your fuel volume control.

Common Symptoms

• Engine misfires
• Rise in fuel consumption
• Overall fall in fuel economy
• Flashing of service soon and check engine light

Wish to correct this error code with your vehicle? Do you know what all you should do to make your car free from this code? Well, don’t worry! We are here to guide you.

• Begin correcting this error code by replacing or repairing the deactivation solenoid
• The next step is to clean off all the corrosion from the connectors
• Repair or replace the faulty oil filters
• Make sure that the engine oil is of right specifications and filled upto right level
• Make sure to clean the blocked oil passages
• Repair the faulty car’s ecm

If you need any parts to fix this problem you can easily find them with us. Not only that we also have in stock the best in range auto parts and that too at the most budget friendly prices ever online. Whether you need a Exhaust Valve, PCM, ECM, Valve Timing Solenoid, Engine Oil you can simply rely on us for quality auto parts.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• Firstly research the technical service bulletins specific to your vehicle make and model. Next step is to the engine oil and check if it is serviced up to the needed level.
• Once this is done, then the next step is to look for all the related components and parts with the cylinder 6 exhaust valve control circuit.
  
• Once located, check for any physical damage through an in depth visual inspection.
  
• Check the wiring and connectors for any bare wires, burn spots, scraped etc. After all of this contact a technical to check for the configurations and see if every incorporated component within the cylinder 6 exhaust valve control circuit is in good shape.

Advanced Steps - These steps will be vehicle specific and will need few technical equipment to ensure the safety and accuracy.

You will need a digital multimeter and technical references. Here the oil pressure gauge will help you in your troubleshooting process. 

Voltage Checks - Also the required voltage will depend upon the specific vehicles and the circuit configurations.

In case you diagnose the lack of power source or ground, then you might require continuity tests to check the wiring integrity, connectors integrity and other components.

Also perform the continuity tests with the power removed. No continuity will be an indication of faulty wiring that is open, shorted or corroded and must be repaired or replaced.

Common Mistakes When Diagnosing the P3448 Code

Beware of the following misdiagnosis

• Low engine oil level
• Faulty powertrain control module
• Faulty vvt solenoid