P2A07 OBD Error Code: Problem & Solutions

 <<See All OBD Codes

The performance of the engine which is less is known as the O2 sensor negative voltage bank 1 sensor 2. The aim of the oxygen sensor is to calculate the oxygen content. This is usually done when the exhaust gas go out of the combustion process of the engine. To conserve the effective fuel economy, the data might be highly critical to the PCM’s ability. The information that is received from the sensor, or if the faulty sensor is identified by the PCM, then the error will be set in the vehicle.

The O2 sensor negative voltage signal is carefully operated by the engine control module. When the factory specification is not correctly met by the O2 sensor negative voltage, then the ECM will store the error code in the vehicle.

What causes this problem with the O2 Sensor Negative Voltage Bank 1 Sensor 2?

• The O2 sensor bank 1 sensor 2 might seem to be defective.
• You might find an opening in the O2 sensor bank 1 sensor 2 harness or the circuit might be shorted.
• The electrical connection might be poor in the O2 sensor bank 1 sensor 2 circuit.

1. Oxygen Sensor - Illumination of the check engine light is a common symptom of a faulty oxygen sensor. Change it as soon as possible to avoid the P2A07 error.
2. Engine Control Module - The behavior of your engine will be very erratic if the ECM is faulty or broken. Get it fixed or replaced as soon as possible.
3. Powertrain Control Module - The powertrain control module will monitor and compensate for any change in altitude and looks after the overall health of your car. The right replacement for your faulty powertrain control module can be found at PartsAvatar at the best prices.
4. Fuel Injector - The engine will not start at all or it will start to surge as you accelerate. This is one of the common symptoms for a faulty fuel injector which needs quick replacement so that the engine functions normally.
5. Exhaust System - Emission of black smoke is a sign of malfunctioning exhaust system. Fix them as soon as possible.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P2A07 here:

Common Symptoms

• The engine performance might be decreased.
• Fuel consumption might be increased.
• The engine light or the service engine soon warning light might be blinking

Want to correct the Trouble Code P2A07? Read these points mentioned below:

•  Altering the broken oxygen sensor can help you to get rid of this issue. 

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced ECM, oxygen sensor, PCM and a lot more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

• As the fuel economy started increasing, the acceleration was very seriously taken and the loss of the engine vacuum lead to very serious loss of braking assist when the P2A07 error code was found in the 4 cylinder mode.
•  In addition to these problems, as the company implemented a hydraulically controlled system that can be switched within the car, the version that was implemented by them had to be changed manually in the engine compartment with the help of hand tools.
• This is a general type of error code, where the diagnosis process and the repair work is not difficult to execute.
• Whenever this error arises, the mechanic will use a scanner to check the trouble codes in the vehicle. But a trained professional will use an advanced scanner like Autohex- to check for advanced diagnostic process.
• Attach this scanner and retrieve every of the stored codes and freeze frame data.
• Retrieve every codes and see if the error appears again.
• This can help you to know if the condition was erratic or not.
• Once the error codes are cleared, test drive the vehicle again to see if the error pops up.
• The mechanic will carefully look into the oxygen sensor and fuel injector if they are broken, damaged or corroded. If they are defective it will be replaced quickly.
• As a very rare case, you will find the engine control module or the powertrain control module to be faulty which has to be replaced quickly.
• If there are any other error codes, they must be rectified first, before further proceeding with the P2A07 error code.
• After the diagnosis, it is good to always reset the code and the vehicle must be test driven to know if the issue is resolved. Test driving the vehicle will help the mechanic to know as to where the error occurred.

Common Mistakes When Diagnosing the P2A07 Code

• Broken PCM.
• Electrical wires might cause some problem.
• Oxygen sensor might be malfunctioning.
• Exhaust might be leaky.