Error Code P2849: What It Means & What To Do?

 <<See All OBD Codes

See the check engine light blinking? Too many big terms to comprehend at once? Feeling stuck? Not anymore, Parts Avatar has your back! Here we have written down all that you need to know about the error code P2849. It should be noted that the OBD-II code transmission may not shift properly is also known as a shift fork "A" stuck. Well, the transmission takes charge of converting the power generated by the engine to movement of the vehicle. Several transmissions employ the electric motors when they want to change the gears. When if the transmission control module identifies failed shifting of the transmissions, it stores the OBD-II code P2849.

One can observe two electric motors that aid greatly while shifting the gears in the transmission. One can be located for the gears 1-3-5 and the other one for the gears R-2-4-6. Also, the function of gear shifting is performed by the two shift drums that are attached to the shift motor pinion through the two ideal gears. The maximum shift force is evaluated to be 1500N (337 lb.). These electric motors can be found installed in transmission control module itself. These motors function separately of each other.

What causes this problem with the Shift Fork "A" Stuck?

• Invalid transmission control module (TCM) program
• Jammed transmission control module (TCM)
• Bad transmission assembly

1. Transmission Control Module - Sudden jerks and bucking are observed when the transmission control module fails to function according to the manufacturer’ specifications. We advise you to change or repair it as soon as possible. What are you waiting for? We are just a click away!
2. Oxygen Sensors - Weary and damaged oxygen sensors can often be problematic. In order to sustain the overall operations of the system a good quality oxygen sensor is essential. So, to add some spark to your ride you definitely need the perfect quality oxygen sensors offered at Parts Avatar. Isn’t that just the perfect deal?
3. Powertrain Control Module - Want to travel? But observing a no-start condition? Sluggish engine cranks? Well, all these problems are likely to be caused due to failed powertrain control module. Repair or replace now from Parts Avatar.
4. Electronic Control Unit - Stressed? Tired of these problems including harsh shifting and stalling? Well, we have a solution for you! All you got to do is mend or restore your damaged ECU.
5. Engine Control Module - A trouble with the ECM would create a lot of problems disturbing the overall functionality of the vehicle. So, all we advise you to do is to change or repair it immediately before you end paying a hefty amount on unnecessary repairs.
6. Diagnostic Tools - It is true that any OBD code problem requires deep insight into the problem and high-grade tools in order to fix it properly. So then, you should definitely buy quality diagnostic tools from us!

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD code P2849 here:

Common Symptoms

• Rising fuel consumption
• You’ll observe failed transmission shifts

Here are some ways with the help of which you will be able to correct the OBD code P2849:

• Repairs or replacements should be performed fix a damaged transmission control module (TCM)
• Mend or restore a defective transmission assembly as soon as possible if you want to rid of the error code P2849
• Make sure you update an outdated transmission control module (TCM) program for avoiding any further problems stimulated by the error code P2849

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade transmission, TCM, transmission wiring, internal transmission, powertrain control module, engine control module and a lot more for our precious customers.

Thinking of where to start? How to diagnose the error code accurately? Well, then you should follow these steps in order to diagnose this fault code:

The diagnosis procedure should be started by simply acquiring a customary OBD-II trouble code scanner that should further be employed to diagnose this trouble code P2849. Using this scanner, confirm and check the freeze frame data and assess the code. The technician should also check for additional trouble codes stored too. After the repairs have been successfully performed, make sure that the codes are cleared and the vehicle should then be test driven to see if the code recurs. If the code vanish it could likely be due to a faulty diagnose or may represent an intermittent issue. We recommend you to reach out for professional help due to the circuitry involved.

Common Mistakes When Diagnosing the P2849 Code

Here we have listed a few common mistakes that should be avoided while performing the diagnosis:

• A faulty internal transmission
• A malfunction in the transmission control module (TCM)
• The transmission control module (TCM) should be calibrated
• Update the old transmission control module (TCM) software
• Problems related to the wirings