P283C - OBD Trouble Code

 <<See All OBD Codes

Baffled? Too many big words to comprehend at once? No worries, you have just landed at the right place. Parts Avatar has listed here all that you need to know about this OBD error code. This OBD-II code transmission may not shift properly is determined as a shift fork "C" position circuit range/performance. The transmission holds the responsibility of altering the power generated by the engine to movement of the vehicle. Numerous transmissions make use of the electric motors to change gears. When the transmission control module identifies that the transmission is not shifting properly, the code P283C will be stored.

It is notable that there are two electric motors that are employed to shift the gears in the transmission. One is used for gears 1-3-5 and one for gears R-2-4-6. There are two shift drums that are attached to shift motor pinion through two ideal gears that perform the gear shifting. Also, the maximum shift force is calculated to be 1500N (337 lb). All these motors are fixed in the transmission control module (TCM) and function independently.

What causes this problem with the Shift Fork "C" Position Circuit Range/Performance?

• An outdated transmission control module (TCM) program (reprogram TCM)
• Distorted transmission control module (TCM)
• Fault in the transmission assembly

1. Transmission Control Module - This essential unit performs the important function of collecting the data and processing the signal within the transmission. So, a faulty one can invite a whole lot of problems. Log into Parts Avatar now for your new transmission control module.
2. Transmission Wiring - Is your car not starting in one go? Or are you facing some intermittent starting issues? If yes, then it indicates that your transmission wiring is corroded or faulty. So, it is very important to replace the transmission wiring with us at equitable prices.
3. Transmission Gears - The transmission gears offer speed and torque conversions from a rotating power source to another device. So shorted or failed ones should be mended or restored immediately. Log into Parts Avatar for your new transmission gears instantly.
4. Brake Pedal - Get your error code fixed instantly with a new brake pedal. Parts Avatar is just the right place that provides the best brake pedals across the country.
5. Brake Pads - Whenever the brakes are applied hydraulically, the calliper instantly clamps or squeezes the two pads together onto the spinning rotor to slow/stop the vehicle. So malfunctioning brake pads should be repaired or restored immediately. Visit us today if you wish to restore or repair them. 

After knowing all the cause behind the issues, let’s have a look at few common symptoms of this problem. Read through this section to learn more about this error code P283C:

Common Symptoms

• An increase in the fuel consumption
• The driver will notice that the transmission is not able to shift properly

Fixing problems with your car is not as easy as it might seem. You need to be extremely careful and follow certain steps:

• Repair or replace a defective transmission control module (TCM)
• Mend or restore a malfunctioning transmission assembly
• Ensure that you immediately update an outdated transmission control module (TCM) program and reprogram it

If you need parts to correct this problem, you can easily find them all with us at PartsAvatar. We have in stock high end auto parts TCM, transmission control module, transmission wiring, transmission gears, brake pedal, brake pads from top automotive brands. So, what are you waiting for? Grab best deals today with us.

If you want to easily diagnose this fault code P283C, then all you have to do is to follow the steps which are mentioned below:

Generally, it is expected that whenever the foot presses the brakes, the car will slow down and come to a stop. The hydraulic pressure aids the brake pedal while power is applied by the foot. The foot’ force brings together a piston and calliper along with the brake pads attached (bonded rough and heat resistance metal or ceramic) to put pressure on the rotor. This code P283C is usually detected on vehicles that have electronically controlled automatic transmissions. The 3-4 shift solenoid holds the responsibility for activating the hydraulic circuits to actuate the clutches or bands that further change the gears present inside the automatic transmission.

Common Mistakes When Diagnosing the P283C Code

Here we have listed a few common mistakes that should be avoided while diagnosing the error code P283C:

• A failed transmission (internal)
• Faulty transmission control module (TCM)
• Calibration of the transmission control module (TCM)
• An expired transmission control module (TCM) software (should be updated)
• Wiring issues present in the system