Error Code P2839: What It Means & What To Do?

<<See All OBD Codes

The trouble code P2839 can be explicated as Shift Fork "B" Position Circuit High. If the transmission control module would detect a variation in the voltage coming from the shift fork "B" position circuit delivered performance that is outside the parameters set by the automobile manufacturer, then it would store the P2839 fault code. This would give rise to the flashing up of the check engine light.

Do you want to gain some more knowledge about the P2839 trouble code? It is the transmission which converts the power produced by the car engine to movement of the automobile. There are some transmissions which use the electric motors to change gears. Now if the transmission control module would decide that the transmission is not shifting in the right manner, then the P2839 error code would start flashing. The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile.

What causes this problem with the Shift Fork "B" Position Circuit High?

• Old fashioned transmission control module (TCM) program
• Malfunctioning transmission control module (TCM)
• Quirks in the transmission assembly

1. Engine Control Module - Want to know the most common reason behind the failure in the engine control module? Corrosion or damage because of moisture can cause ECM failure. Corrosion might enter the ECM through the wiring harness and moisture can enter by a failure in the seals in the ECM itself.
2. Automatic Transmission Module - If the transmission module is faulty, then the vehicle might experience erratic gear shifts and throttle response. The engine might also stall will be accelerating and slowing down. Thus, replace faulty automatic transmission module, if required.
3. Powertrain Control Module - The PCM makes the engine and transmission work in tandem. Any issue with the powertrain control module will cause major problems with the efficient running of the vehicle.
4. Transmission Fluid Pump - A failed transmission fluid pump can cause the fluid not being able to circulate in the transmission and the driver may smell the fuel burning. Thus, it might need immediate replacement.
5. Car Battery & Cables - Most of the time the battery cables and connectors are at fault for a particular component not functioning properly. Thus, the battery cable and connector should be checked for and replace in time.
6. Electronic Control Unit - If your vehicle fails to start for no apparent reason, this is also a good indicator that there can be some issues with the ECU. If you check the car battery, starter and other common electrical components, and the vehicle still does not start, a quirky electronic control unit should be the next logical thing to consider.
7. Transmission Fluid Pump Harness - Damaged pump harness can lead to problematic transmission performance and can cause transmission slipping, rough shifts, fuel leakages and delayed engagements. Buy new fluid pump harness now!
8. Diagnostic Tool - In order to fix these errors, you need a few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come in handy to do so and resolve all your vehicle problems. Visit today!

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P2839 here:

Common Symptoms

• Check engine light might come into signal
• Transmission might not shift properly
• Rise in the overall fuel consumption

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• Carefully adjust the faults in the PCM/ECM
• Recondition the non-functioning transmission control module
• Adjust the flawed transmission assembly

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced transmission control module, transmission gears, transmission assembly, auto transmission, pcm, ecm, tcm and a lot more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

A certain sign of this is smoke or steam being discharged from under the car hood. The ignition timing could be set incorrectly and there would be a need to adjust it. Now when you are searching under the car hood, you might notice that the drive belts appear loose, then you must tighten them properly or else they can always be replaced. If you find out that there is a visible pool of fluid underneath the car, then it might indicate a failure in the cylinder head gasket. It would be confirmed in the form of billowing smoke being blown from the exhaust system. Just keep one thing in mind that the parts and components should not be restored with reference to only a P2839 trouble code. You can always consult the vehicle service manual for more on possible causes of the error, along with required testing.

Common Mistakes When Diagnosing The P2839 Code

• Flaws in the internal transmission
• There might be a need to calibrate the transmission control module (TCM)
• Transmission control module (TCM) software requires to be updated
• There can be some issues in the transmission control module
• Failure in the car wiring