P2788 - OBD Trouble Code

<<See All OBD Codes

The trouble code P2788 can be defined as Auto Shift Manual Adaptive Learning at Limit. The transmission control module would go through a learning process to correctly shift the transmission depending upon the driving habits of the driver. Now if the transmission would not be able to adapt to what is being requested, then the P2788 error code would start triggering.

Your automobile adapts to your particular driving habits via adaptive transmission. This function would be controlled by the PCM (powertrain control module) or TCM (transmission control module), by utilizing a variety of data obtained from sensors, actuators, and hydraulic pressure information. The main role of the system is to enhance torque application and devise an efficient shifting strategy according to the driving situations.

What causes this problem with the Auto Shift Manual Adaptive Learning at Limit?

• Blocked transmission fluid passages
• Malfunctioning electronic pressure control solenoid
• There can be inoperative internal mechanical transmission
• Contaminated or grubby transmission fluid
• Less transmission fluid
• Unusable TCM
• Quirks in the PCM

1. Engine Control Module - It is not always the components, but the ECM that can also be faulty. It can cause misinterpretation of correct data thus leading to wrong operational decisions which will affect the transmission and overall engine performance. Thus, replace faulty module and reprogram it now!
2. Powertrain Control Module - Powertrain Control Module can also be faulty in rare cases and thus needs through checks for system and software errors. Thus, check and replace it, if required.
3. Automatic Transmission Module - A defective transmission module will affect the gear shift mechanism and also affected during acceleration and deceleration. This will lead to affected engine performance and fuel delivery system. Thus, replace faulty transmission module now!
4. Fuel Pressure Regulator - Without the fuel pressure regulator, the fuel rail will not be able to build up enough pressure to support the injectors with the sufficient amount of fuel, the fuel will instead flow straight through and not reach the injectors. Thus, replace faulty pressure regulator now!
5. Electronic Control Unit - The ECU manages the cooling system to control the battery operating temperatures and thus must be replaced if found faulty. Thus, buy new ECU modules and components from us!
6. Transmission Fluid Pump - Faulty transmission fluid pump can cause harsh shifts and audible transmission noise. This leads to decreased performance and chances of increased physical damages to the transmission components. Thus, replace it immediately.
7. Diagnostic Tool - Make use of quality diagnostic tools to resolve any OBD error code. Buy quality diagnostic tools from us!

Willing to know some common symptoms of OBD Trouble Code P2788? Your wish is our demand. Have a look at them below:

Common Symptoms

• Visibility in the check engine light

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P2788:

• Repair or replace the quirky electronic pressure regulator
• Rehabilitate the defaults in the TCM
• The malfunctioning transmission pump should be repaired or replaced as per the need
• Carefully adjust the faults in the wiring and connectors
• Solenoids, sensors, or actuators should be restored to working order
• Recondition the non-functioning PCM
• It is necessary to perform proper service of the unsound transmission
• Adjust the leakages in the transmission fluid

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade transmission control module, TCM, PCM, powertrain control module, pressure control solenoid, torque converter clutch, electronic pressure regulator and a lot more for our precious customers.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• A technician begins by hooking the vehicle to an OBD-II scanner to verify that the code is present, and check for other codes. The freeze frame data along with current data is recorded, and the codes are then cleared to see if they reoccur.
• Visual inspection of the wiring and connectors to check for loose connections, corrosion, or shorts is done.
• A specialized tool may be used to test the transmission fluid level. Other tests of the pressure control solenoid, shift solenoids, torque converter lockup solenoids, and transmission temperature sensor may help pinpoint the problem, as well as inspection of the wiring and connectors.
• Disconnect and check the resistance and signal voltage from the wiring and connectors. If all the components check out, inspect for the fault in the PCM as it can sometimes store wrong OBD code and thus might need replacement or reprogramming.

Common Mistakes When Diagnosing The P2788 Code

• Some issues related to the transmission control module (TCM)
• Failure in the internal transmission
• Less transmission fluid level
• Issues related to the wiring