P2784 - OBD Trouble Code

<<See All OBD Codes

The trouble code P2784 can be elucidated as Input/Turbine Speed Sensor "A"/"B" Correlation. The Input Speed Sensor would inform the Transmission Control Module (TCM) how fast the engine is spinning so the right gear can be engaged. Now when the TCM would receive an unusual signal from this sensor, then it won’t be able to properly shift the vehicle from gear to gear as the vehicle needs to change speed a rate of acceleration. There are a lot of automobiles which utilize the crankshaft position sensor for this information. This error code is set by the ECM or the TCM.

Want to learn something more about the P2784 fault code? It is the input speed sensor which would detect the main pulley revolution speed and then would send a signal to the transmission control module (TCM) and engine control module (ECM). This error code would be set by the ECM when the input speed sensor would not be as per the specifications set by the manufacturer.

What causes this problem with the Input/Turbine Speed Sensor "A"/"B" Correlation?

• There can be inoperative input speed sensor
• There can be opened or shorted input speed sensor harness
• Input speed sensor circuit inferior electrical connection

1. Speed Sensor - If the speed sensor is faulty, then the PCM will be unable to detect the correct motor speed and might result in transmission faults. Thus, it is important to check for these faults and replace damaged speed sensor immediately.
2. Engine Control Module - Most of the time it is difficult to intercept the ECM faults and thus must be checked for thoroughly. There can be a problem with the circuit or the software might have malfunctioned. Thus repair, replace or reprogram the component as per requirement.
3. Transmission Control Module - The TCM monitors the functioning of the transmission system and will store this OBD code if the fluid pump does not function properly. Contrary, the TCM can also be faulty and might need reprogramming and replacement. Thus, replace it now!
4. Powertrain Control Module - If the PCM is faulty, it can store wrong OBD codes and can lead to misdiagnosis. This can happen due to misinterpretation of data received from the various sensors and components which also affects the vehicle’s performance. Thus, replace it immediately.
5. Manual Transmission Shifter - If your manual transmission shifter is broken, then you will be able to move the shifter into any position, but keep in mind that the car transmission would stay in the exact same gear. Get it checked and replace if needed.
6. Electronic Control Unit - If the ECU is at fault, it will not be able to read the boost converter temperatures correctly leading to underperformance. Thus, replace faulty ECU now!
7. Diagnostic Tool - Choose from our diagnostic tools collection that will come in handy to detect and correct the OBD error code.

You might be thinking that how would you diagnose these problems? We at Parts Avatar Canada would help you diagnose the major symptoms easily.

Common Symptoms

• The service engine soon light can start lighting up
• There might be some failures in shifting
• The speedometers might be operating badly
• The car engine might start stalling upon breaking
• The automobile might not start at all
• Diminishing fuel economy
• The car engine might start misfiring

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• You must replace the faulty wiring
• It is essential to restore the flawed turbine speed sensor
• Repair or replace the quirky PCM/ECM
• Rehabilitate the defaults in the turbine speed sensor connector

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of speed sensor, TCM, PCM, transmission control module, crankshaft position sensor, engine control module, ECM, speed sensor connector, powertrain control module, pcm car, ecm car, pcm module, ecm module and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• On test driving, if the P2784 code does not return soon, he will know that an erratic condition exits.
• But if the error returns instantaneously, he will check every component of the control module as well as the circuit like connectors, wires, harness, fuses etc for any possible fault.
• If any component is damaged, he will fix them right away.
• After performing this repair, he will inspect the input speed sensor as well.
• If there are some faults in the input speed sensor, then it needs to be replaced.
• Every time a repair work is carried out, make sure that the mechanic test drives the vehicle after every repair so that the diagnosis is successful. This can eventually help him to know as to where the error occurred.

Common Mistakes When Diagnosing The P2784 Code

• There can be some faults in the crankshaft position sensor
• Negligence in the powertrain control module
• The transmission control module might start failing
• Wiring problems