Guide To P26A0 OBD Error Code Solutions

<<See All OBD Codes

If you are looking for information with regard to the P26A0 error code, then you are at the right place. Low engine performance is known as exhaust aftertreatment glow plug control performance. The remaining exhaust particles will be assisted by the diesel exhaust fluid (DEF) to convert them into harmless gases. The temperature of the exhaust system has to be high if these exhaust particles have to be burnt. When the DEF is pushed into the exhaust stream it will raise the diesel particulate filter up to the expected temperature. The system will then be able to process these harmful NOx to carbon dioxide, water, and nitrogen.

In cold temperatures, the DEF will be prevented from freezing by the glow plugs. You will find the P26A0 error code in the vehicle if the glow plug malfunctions. The monitoring of the exhaust aftertreatment glow plug control circuit is done by the PCM. Failing to meet the factory specifications by the exhaust aftertreatment glow plug control circuit will result in the storing of error code by the PCM.

What causes this problem with the Exhaust Aftertreatment Glow Plug Performance?

• The exhaust aftertreatment glow plug might not work properly.
• Presence of a short circuit or an opening in the exhaust aftertreatment glow plug harness.
• Weak electrical connection in the exhaust aftertreatment glow plug circuit.

1. Powertrain Control Module - You can find the powertrain control module to be damaged if the engine light keeps flashing and if the car fails to start immediately. The right replacement for your damaged powertrain control module can be found at Parts Avatar.
2. Glow Plug - Do you find it difficult to start or accelerate your vehicle? Then there is a high chance that the glow plug can be damaged which needs fixation to avoid the P26A0 error.
3. Shift Solenoid - Does your check engine light blink very often? Then you have to replace the shift solenoid as it might be defective or broken.
4. Electronic Pressure Regulator - Does your engine misfire very often? Then there is a chance that the electronic pressure regulator can be faulty which must be replaced quickly.
5. Glow Plug Relay - A faulty or loose glow plug relay has to be fixed or replaced with a new one to avoid disturbance in the system.
6. Engine Control Module - Bad input from the sensors as well as other control modules will cause the malfunctioning of the engine control module. Get the right replacement for your defective engine control module at the best prices from Parts Avatar.

Interested in knowing the symptoms to OBD code P26A0? If yes, then you have arrived at the right place. We at PartsAvatar have listed out few common symptoms associated with this fuel injector problem.

Common Symptoms

• The engine performance might be very low.
• You might not find the DPF regeneration in the vehicle.
• The warning light of the service engine or the engine light might be flashing.

After you know the symptoms of your vehicle’s problem, it becomes easy to detect it and get started with solving it. So, next on our list is a few common steps to correct this issue with your vehicle’s:

• Test drive the vehicle by clearing the codes to make sure the diagnosis is successful.
• The best suggestion is to give it to the professionals as they know to handle them wisely as numerous circuits are included.
• You will find this EGT sensor utilized in diesel engines, gasoline burning engines, and even turbocharged engines.
• The main reasons for low pump pressure can be – the hydraulic passages that are blocked, the pump that is faulty, shift solenoids that are defective or may be an electronic pressure regulator which can be damaged.

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of PCM, glow plug, shift solenoid, electronic pressure regulator, glow plug control module, glow plug relay, ECM and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P26A0 code to be stored:

• The new multi-displacement system will turn off opposite pairs of cylinders, allowing the engine to have three diverse configurations and displacements.
• P26A0 code involves elaborate diagnostics procedures which show several engine trouble codes on the air conditioning display.
• Still, the system was troublesome, misinterpreted by customers, and the erratic failures led to the technology being quickly old.
• In order to successfully diagnose this error code, you can use an OBD-II scanner (or code reader), a digital volt/ohm meter, and an oscilloscope.
• You can also use several other tools, to successfully diagnose this error.
• It is always best to install some sort of memory saving device, else the PCM and the other controllers will lose their memory which will require further reprogramming.
• In order to complete several other tasks, the signal will be transferred to the control modules that are affected so that they can use this data.
• You will hear a strange noise from the turning radiator fan blade or else the belt which is responsible for turning the fan blade.
• You will also see several other belt driven devices below the hood.
• An engine pulley is usually placed on the engine of an automobile which drives all these belts.
• The serpentine belt is a continuous belt which every car has, in order to drive multiple peripheral devices.
• The OBD-II error code P26A0 can also be activated by the issues that were already present down the line.
• For instance, the car may start overreacting due to a dirty MAF sensor in its fuel trim adjustments.
• The final result is that you will find the oxygen sensors to experience fuel mixture problems.

Common Mistakes When Diagnosing the P26A0 Code

• Damaged glow plug control module.
• Broken Glow plug relay.
• Electrical wiring issue.
• PCM might be broken.