Guide To P267B OBD Error Code Solutions

<<See All OBD Codes

Do you have issues with your vehicle’s rocker arm actuator position sensor circuit? If YES, chances are that you might end up with OBD error code P276B flashing on your vehicle. Wondering what this error code means? Worried? Don’t worry! You can have in depth understanding of this error code P267B with the help of our subsequent sections.

Are you aware of what this problem wants you to do? In case you are not, we have taken the initiative to enlighten you for the same. Your vehicle’s ECM or Engine Control Module will illuminate the check engine light with error code P267B when it detects some errors within the ‘B’ rocker arm actuator sensor circuit. P267B is set when there is a performance problem within “B” rocker arm actuator position sensor circuit.

What causes this problem with the B Rocker Arm Actuator Position Sensor Circuit Range/Performance?

• Malfunctioning engine control unit (ECU)
• Bad mass airflow sensor
• Air leakage forward of the diesel particulate filter, that might result in changing the sensor readings

1. Engine Control Module - Car’s ECM performs various important functions that help your vehicle to run smoothly. It is the computer of your vehicle, don’t delay repair if the P267B code is flashing. If needed replace with PartsAvatar order from the comfort of your home, and have it delivered right to your doorstep.
2. Powertrain Control Module - Powertrain Control Module also known as your vehicle’s brain if faulty can be really troublesome. Don’t take risk and replace faulty PCM today to get rid of this error code P267B.
3. Electronic Control Unit - Looking for electronic control unit to correct this issue? Then we can be your dream destination. We have stocked best priced car ECU’s for every make and model on the Canadian roads.
4. Diagnostic Tools - Faulty or inaccurate diagnostic tools won’t help you diagnose P267B code. Find the perfect one to diagnose this code today from PartsAvatar.
5. Rocker Arm - Rocker arms that are damaged can cause the variable valve timing to get disturb, thus causing affected engine performance. So, what are you waiting for? Replace the faulty ones today with us at PartsAvatar.

We at Parts Avatar Canada care for our customers, and that’s why we will help you to diagnose P267B code by listing out some major symptoms. They are mentioned below as follows:

Common Symptoms

• An extremely hot exhaust cat converter
• Bad acceleration
• Flashing of light
• Rising engine temperature
• Increase in vehicle’s fuel consumption

Here are some ways with the help of which you will be able to correct the OBD Code P267B:

• Repair or replace the defective oil pump
• It is essential to restore the flawed oil control valve
• Repair or replace the quirky rocker arm actuator
• Fix the defaults in the oil pressure sensor
• Fix the bad wiring and connectors

Apart from this, you might need to replace other damaged parts too like ECM, Rocker arm, Engine’s valve, Engine oil, PCM, VVT, Crankshaft, VCT and more. You can easily find all these parts with us. Not only that you can get these parts shipped to your door free, if your cart value happens to exceed $99.

Make use of a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.

Carefully inspect for every stored code and freeze frame data as it can help down the way for further diagnosis process.

The vehicle’s computer should be inspected with a scanner in order to find out whether there are other accompanying codes, and whether they return after being cleared and then the vehicle should be taken out for a test drive.

Examine the oil level and pressure.

The oil pressure sensor and rocker arm actuator screens should be visually inspected.

Carefully examine the wiring and connections involved in the oil pressure sensor and rocker arm actuator.

The circuitry with a voltmeter should be tested and if the position sensor if faulty, it must be replaced immediately.

Also inspect the PCM for any errors which may lead to wrong codes getting stored in the system and repair and reprogram the system immediately.

Common Mistakes When Diagnosing The P267B Code

• Malfunctioning powertrain control module
• There can be a failure in the rocker arm actuator position sensor
• Wiring and connector problems