P2663 - OBD Trouble Code

<<See All OBD Codes

The trouble code P2663 can be described as B Rocker Arm Actuator Control Circuit Low Bank 2. The error code P2663 would start triggering when the PCM would detect some fault in B rocker arm actuator control circuit. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code. The P2663 trouble code would indicate that a B rocker arm actuator control circuit which is not as per the predetermined limit has been detected by the ECM. Now when this would occur, the fault code would be stored and there would be an illumination of the malfunction indicator light.

What causes this problem with the B Rocker Arm Actuator Control Circuit Low Bank 2?

• There might be overfilled or low engine oil
• Invalid engine oil type
• Defaults in the 'B' Rocker Arm Actuator Sensor
• 'B' Rocker Arm Actuator Sensor harness might be opened or shorted
• 'B' Rocker Arm Actuator Sensor circuit might have bad electrical connection

1. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
2. Fuel Delivery System Parts - All of us are well aware that fuel is one of the key ingredients that your car engine need to function correctly, and if anything would hinder the free flow of the fuel to the engine, then it would lead to bad performance or sometimes it might prevent the vehicle from starting at all. So you must take proper care of it or else you can always buy new fuel delivery system parts online from us at affordable prices.
3. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
4. Fuel Injector - Faulty fuel injector, it will cause rough idles and difficulty in starting. Also, it will affect the fuel economy and engine performance. Fuel injector can also crack or break leading to leakages and should be replaced immediately.
5. Electronic Control Unit - The ECU is a major component of your car's onboard computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.
6. Diagnostic Tools - Take the help of a professional mechanic to diagnose OBD code error. Use high grade diagnostic tools to resolve this issue. Buy new tools and equipment form us!

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P2663 code by mentioning some major symptoms below:

Common Symptoms

• Illumination in the service engine soon light
• Bad engine performance
• Rise in the fuel consumption

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P2663:

• Repair or replace the quirky oil control valve
• Rehabilitate the defaults in the oil pump
• Make sure to mend the faulty wiring and connectors
• Carefully adjust the faults in the rocker arm actuator
• Recondition the non-functioning oil pressure sensor

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of pcm, rocker arm, position sensors, fuel injection kit, fuel injector, crankshaft bearing, fuel injection system parts, ecm, pcm module, ecm module and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• Monitor crankshaft and camshaft positions using electromagnetic sensors.
• A proper diagnosis should begin with making sure that all engine timing indicators are properly aligned. After that, test belt or chain deflection using manufacturer’s specifications.
• VVT or VCT solenoids and circuitry is to be tested if timing components prove to be properly aligned and in good working order.
• Check for electrical wiring and connectors as they are more prone to fail than sensors, especially where oil or other corrosive fluids are present.
• An OBD-II scanner (or code reader), a digital volt/ohmmeter, and an oscilloscope can be used to diagnose this error.
• Repair or replace damaged, disconnected, shorted, or corroded wiring, connectors, and components as necessary.
• Always retest the system after repairs are completed to ensure success. If all system wiring, connectors, and components (Including fuses) appear to be in normal working order, connect the scanner (or code reader) to the diagnostic connector and record all stored codes and freeze frame data.

Common Mistakes When Diagnosing The P2663 Code

• There can be a failure in the variable valve lift controller assembly
• Defaults in the PCM
• Some issues related to the wiring