Error Code P258E: What It Means & What To Do?

<<See All OBD Codes

Is your Check Engine Light illuminated on the car’s dashboard? Is your vehicle auxiliary component not working properly or responding to the PTO switch? Then, there might be a possibility of an issue with the transmission control module and PTO system of the car thus indicating OBD Code P258E error. OBD code P258E means that the PTO Enable Switch Performance Issue.

When you ask, “What does a PTO do?” you can sum up the action where it converts rotary power over into hydraulic power. Once converted into hydraulic power, it runs the hydraulic hook-ups like oscillating power mowers, cotton pickers, backhoes, fire engine pumps and dump trucks. The access happens most often through a mechanical, electrical or hydraulic pump, and the motor converts the force back into a mechanical force or a rotary force, depending on the need.

What causes this problem with the PTO Enable Switch Performance?

PTO enable switch not working

Switch circuit wiring and connectors may be damaged or burned

Transmission issues

ECU problematic

1. Engine Control Module - The solenoid might cause a short in the engine control module because of corrosion in the solenoid or the wire running from the solenoid to the ECM harness.
2. Electronic Control Unit - The ECU power management control module keeps in check the hybrid battery charging functions. If the ECU is faulty, the battery pack will not be able to properly get charged and thus, the ECU might need replacement.
3. Powertrain Control Module - A trouble with the PCM would mean that it is unable to determine the right fuel mixture and would send the car engine either more or less fuel than it requires. Now when the engine gets more, the carbon emission would increase and fuel economy would drop. In case of the opposite, the engine will choke, stutter, and might start stalling sometimes.
4. Diagnostic Tool - Usually any OBD code problem requires deep insight into the problem and high-grade tools in order to fix it properly. Thus, buy quality diagnostic tools form us!
5. Automatic Transmission Sensor - Transmission sensor plays a vital role in smooth transmission and gear shifts. Repair or replace faulty sensor and components now!
6. PTO Speed Selector Sensor - The PTO speed for any particular secondary component to work properly and safely is monitored closely by the PCM using the speed sensor. Thus, it is important to replace faulty sensor immediately.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P258E here:

Common Symptoms

• Noises from the gear mechanism
• Cracking noises
• Leaky transmission oil
• Secondary component not responding
• PTO switch not responding
• Malfunction indicator light illumination

Here are some ways with the help of which you will be able to correct the OBD Code P258E.

Shift solenoid replacement

• Powertrain control module replacement
• Transmission control module replacement
• Adding or replacing the PTO speed sensor
• Faulty wiring and connector replacement
• Overhauling the current transmission

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade PCM, Transmission, PTO Switch, PTO System, Engine Light and a lot more for our precious customers.

Here are some steps which you should follow in order to diagnose this P0258E fault code.

• A qualified mechanic will need a digital volt ohm meter (DVOM) for the complete test. Continue through the tests until the problem is confirmed. You will also need a basic OBD code scanner to reset the computer and erase the code.
• Begin by checking the levels of the transmission oil. Visually inspect the transmission itself for damage. Inspect the vehicle housing for signs of cracks or damage. If there are any cracks that may or may not be leaking, the transmission should be replaced. Replace any damaged seals. Locate PTO speed sensors and inspect sensors and connectors for signs of damage. If any damage present, repair or replace.
• Inspect for optimal oil pressure. Using an oil pressure gauge, test the transmission oil pressure. Make sure to use the transmission pressure test port. Connect gauge to the test port and start vehicle. Ensure there are no leaks at connection.
• Check for faults in the speed sensors. Unplug the PTO speed sensors. Using multimeter, test the resistance values within the sensor. If values aren’t within specifications, replace sensors and clear codes.
• Identify wires involved in speed sensor circuits. Check for continuity, shorts and open in the wires involved which includes the ECM connector so make sure battery is disconnected before testing and repair the problem.
• Ensure the functioning of the TCM by testing the TCM by back probing the connector and measuring electrical values. Also check the connector and wiring to the PTO speed sensor looking for scraping, rubbing, bare wires, burn spots or melted plastic. Pull the connector apart and carefully inspect the terminals inside the connector.

Common Mistakes When Diagnosing the P258E Code

When diagnosing a P258E code the most common misdiagnosis would be to have the PTO sensor replaced assuming that internal damage has occurred. It is important to note that the PTO system is faulty before replacing any component.