Error Code P255D: What It Means & What To Do?

<<See All OBD Codes

Is your Check Engine Light illuminated on the car’s dashboard? Is your vehicle auxiliary component not working properly or responding to the PTO switch? Then, there might be a possibility of an issue with the transmission control module and PTO system of the car thus indicating OBD Code P255D error.OBD code P255D means that the PTO Speed Selector Sensor/Switch 2 Circuit High Issue.

When you ask, “What does a PTO do?” you can sum up the action where it converts rotary power over into hydraulic power. Once converted into hydraulic power, it runs the hydraulic hook-ups like oscillating power mowers, cotton pickers, backhoes, fire engine pumps and dump trucks. The access happens most often through a mechanical, electrical or hydraulic pump, and the motor converts the force back into a mechanical force or a rotary force, depending on the need.

What causes this problem with PTO Speed Selector Sensor/Switch 2 Circuit High?

• PTO speed sensor not working
• Sensor circuit wiring and connectors may be damaged or burned
• Transmission issues
• ECU problematic

1. Engine Control Module - Dead cells in batteries can cause a failure in the engine control module. Many times, a battery is left in the rig long after a cell has died. This would affect the grounding in the car battery.
2. Powertrain Control Module - If there are some faults in the PCM, then it may throw off the timing and fuel settings of the engine, which can negatively affect the performance. A flawed PCM may cause the vehicle to experience a reduction in fuel efficiency, power as well as acceleration.
3. Diagnostic Tools - Use factory grade diagnostic tools to resolve OBD code P255D error. Buy new diagnostic tools and equipment for us.
4. Automatic Transmission Sensor - Transmission sensor plays a vital role in smooth transmission and gear shifts. Repair or replace faulty sensor and components now!
5. PTO Speed Selector Sensor - The PTO speed for any particular secondary component to work properly and safely is monitored closely by the PCM using the speed sensor. Thus, it is important to replace faulty sensor immediately.

For us our customers are everything, and that’s why we will help you to diagnose P255D code by mentioning some important symptoms below:

Common Symptoms

• Noises from the gear mechanism
• Cracking noises
• Leaky transmission oil
• Secondary component not responding
• PTO switch not responding
• Malfunction indicator light illumination

To correct this issue, you might need to undergo few replacements for the defective parts such as:

• Shift solenoid replacement
• Powertrain control module replacement
• Transmission control module replacement
• Adding or replacing the PTO speed sensor
• Faulty wiring and connector replacement
• Overhauling the current transmission

If you need any parts to fix this problem, you can easily find them with us. Not only that we also have in stock the best in range auto parts and that too at the most budget friendly prices ever online. Whether you need a PCM, PTO Speed Selector Sensor, PTO Speed Selector Switch, Transmission, PTO sense circuit, Engine Light, Oil Pressure Gauge, you can simply rely on us for quality auto parts.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• A qualified mechanic will need a digital volt ohm meter (DVOM) for the complete test. Continue through the tests until the problem is confirmed. You will also need a basic OBD code scanner to reset the computer and erase the code.
• Begin by checking the levels of the transmission oil. Visually inspect the transmission itself for damage. Inspect the vehicle housing for signs of cracks or damage. If there are any cracks that may or may not be leaking, the transmission should be replaced. Replace any damaged seals. Locate PTO speed sensors and inspect sensors and connectors for signs of damage. If any damage present, repair or replace.
• Inspect for optimal oil pressure. Using an oil pressure gauge, test the transmission oil pressure. Make sure to use the transmission pressure test port. Connect gauge to the test port and start vehicle. Ensure there are no leaks at connection.
• Check for faults in the speed sensors. Unplug the PTO speed sensors. Using multimeter, test the resistance values within the sensor. If values aren’t within specifications, replace sensors and clear codes.
• Identify wires involved in speed sensor circuits. Check for continuity, shorts and open in the wires involved which includes the ECM connector so make sure battery is disconnected before testing and repair the problem.
• Ensure the functioning of the TCM by testing the TCM by back probing the connector and measuring electrical values. Also check the connector and wiring to the PTO speed sensor looking for scraping, rubbing, bare wires, burn spots or melted plastic. Pull the connector apart and carefully inspect the terminals inside the connector.

Common Mistakes When Diagnosing the P255D Code

When diagnosing a P255D code the most common misdiagnosis would be to have the PTO sensor replaced assuming that internal damage has occurred. It is important to note that the PTO system is faulty before replacing any component.