Guide To P2471 OBD Error Code Solutions

<<See All OBD Codes

Is your vehicle facing troubles while starting? Is your check engine light on? Or are you facing low power issues? If YES, then chances are your vehicle is set to OBD Error code P2471.

Now, the question that comes to all of our minds is what is this error code P2471? What does it signifies? Well to know all this you will need to go through this article in detail. We are sure, by the end of this article you will be in a position to understand and help your vehicle in the possible manner.

P2471 OBD error code is related to your vehicle’s exhaust gas temperature circuit bank 1 sensor 4. If OBD error code P2471 is set by your vehicle then it means that EGT sensor bank 1, sensor 4 is not sending correct data to the car’s pcm or is operating out of specified range or factory specifications. Chances are it might be defective or damaged, thought the possibility of ECM being damaged is quite low.

What causes this problem with the Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 4?

• Bad exhaust gas temperature bank 1 sensor 4
• EGT Sensor 4 having particulate matter buildup
• Open or shorted sensor harnesses
• Poor EGT sensor bank 1 sensor 4 electrical connections
• Leaking exhaust

1. Catalytic Converter - Care for your environment and do your bit in reducing the air pollution by installing a well functioning catalytic converter in your vehicle. Undergo faulty cat converters replacement today get rid of OBD error code P2471.
2. Powertrain Control Module - A faulty powertrain control module can be very detrimental for your vehicle’s health. It can create issues such as stalling while running or failing to start condition. If you need to get rid of these issues you can replace your bad PCM with a new one today with us and get rid of this OBD error code P2471.
3. Exhaust Gas Temperature Sensor - Well, a damaged Exhaust Gas Temperature sensor can damage other internal components and cause the failure of the system. Alter the defective EGT sensor as soon as possible.
4. Diesel Particulate Filter - As we all know that the diesel particulate filters and other related parts are responsible for filtering the harmful carbon particulates produced in the combustion, so you definitely can’t go with a wrong one. Replace the faulty ones today and say bye bye to OBD error code P2471.
5. Exhaust System Parts - If you need any of the exhaust system parts for your vehicle, then you really do no need to think twice, just buy the ones for your car with us.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P2471 code by mentioning some major symptoms below:

Common Symptoms

• Engine stalling
• No start condition
• Engine overheat
• Low fuel efficiency
• Low engine performance
• Illumination of the check engine light

Have a look at some ways with which you can correct the P2471 code:

• Begin with fixing or replacing the damaged exhaust gas temperature sensor
• Undergo blown out fuses replacement
• Carbon buildup from the connector must be removed
• Fix the exhaust leak
• Also make sure that connectors must be cleaned for any corrosion
• Next, Faulty wirings must be repaired or replaced
• Repair the faulty car’s ECU

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of Catalytic Converter, Pcm, Exhaust Gas Temperature Sensor, Exhaust System, Diesel Particulate Filter, Selective Catalytic Reduction and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• Begin your diagnosis of OBD error code P2471, you will need to look for the technical service bulletins, also known as the TSB’s specific to your vehicle make model and year. Believe us this will save you a lot of time and will guide you in the right direction.
• Now, find and locate all the parts within the exhaust gas temperature circuit and undergo a complete visual inspection to make sure there are no defects such as scraping, rubbing, bare wires or burn spots.
• After this you will need to inspect all the related connectors for any corrosion or defective pins. For those who don’t know this already, the exhaust gas temperature sensor is generally a 2-wire sensor located in your vehicle’s exhaust down pipe.
• Lastly, remove the exhaust gas temperature and check for any carbon buildup. Also, check for any fuel injector or exhaust leakage.

Common Mistakes When Diagnosing The P2471 Code

If you are going to diagnose your vehicle for OBD error code P2471, then make sure that you avoid the following errors

• Problematic EGT sensor
• Bad powertrain control module (PCM)
• Poor wiring