Guide To P2457 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P2457 can be described as Exhaust Gas Recirculation Cooling System Performance. A lot of unburned fuel was wasted and expelled into the atmosphere by the car engine before the introduction of the exhaust gas recirculation system to the vehicles in the 1970’s. But now the system has changed as vehicle should now have a certain emission rating so that it can proceed with the production.

The "insufficient EGR flow" would mean that there are not much exhaust gasses flowing back into the incoming air to the engine. Willing to know what EGR stands for? Full form of EGR is "exhaust gas recirculation". There are there parts of the EGR system: EGR valve, DPFE (differential pressure sensor EGR) and actuator solenoid.

What causes this problem with the Exhaust Gas Recirculation Cooling System Performance?

• The engine coolant might be less
• Malfunctioning EGR temperature sensor
• There can be inoperative exhaust temperature sensor
• Leakages in the exhaust
• Plugged EGR cooler
• Excessive heating of the car engine

1. Manifold Absolute Pressure Sensor - A quirky manifold absolute pressure (MAP) sensor can upset fuel delivery as well as the ignition timing. Some performance problems can also arise like poor fuel economy, lack of engine power and sometimes the car won’t start at all. Find top quality manifold absolute pressure sensor online.
2. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
3. EGR Valve Gasket - A broken EGR Valve Gasket can cause a lot of issues. It would be nice if you get it replaced on time.
4. Exhaust Gas Recirculation Valve - It is auto part commonly found on many road going automobiles. It is a part of the vehicle’s exhaust gas recirculation (EGR) system, an emissions system that is designed to recirculate exhaust gases back into the vehicle’s intake so that it can reduce cylinder temperatures and NOx emissions. Purchase top notch exhaust gas recirculation valve from us at economical prices.
5. Intake Manifold Actuator – The intake manifold actuator assists the intake system in providing correct air flow in the engine cylinder for proper combustion process to take place. The actuator controls the valve and the plates assisting the proper air flow and thus must be replaced, if required. Buy new actuator from us today.
6. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is the in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
7. Electronic Control Unit - The ECU is a major component of your car's onboard computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.
8. Catalytic Converter - Catalytic converters at fault will lead to dropped fuel efficiency and performance along with increased emissions. Thus replace faulty parts now!
9. Exhaust System Parts – Are you seeing this error code flashing? Well, it could be due to malfunctioning exhaust system parts. In addition to this error code, the driver is likely to experience a noisy engine, decrease in power and acceleration. We strongly recommend you to purchase new exhaust system parts from Parts Avatar.
10. Diagnostic Tools – Take help of a professional mechanic to diagnose OBD code error. Use high grade diagnostic tools to resolve this issue. Buy new tools and equipment form us!

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P2457 code by mentioning some major symptoms below:

Common Symptoms

• Illumination in the service engine soon light
• Sometimes there might be no symptoms when this code is stored
• Decrease in the overall fuel efficiency
• Leakages in the coolant
• The auto exhaust might start leaking
• Appearance of exhaust temperature sensor codes

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P2457:

• You must add enough amount of engine coolant
• Make sure to mend the leakages in the exhaust
• Repair or replace the quirky EGR temperature sensor
• Rehabilitate the defaults in the EGR cooler
• The malfunctioning car engine parts should be repaired or replaced as per the need
• Carefully adjust the faults in the exhaust temperature sensor

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of PCM, exhaust gas recirculation temperature sensor, ECM, EGR cooler, cooling system parts, diesel particulate filter, catalytic converter and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

After verifying the P2457 code with an OBD-II scanner, the mechanic should begin with a visual inspection of all electrical components. Use the vehicle information source to search for applicable technical service bulletins (TSB). If you locate a TSB that matches the vehicle make and model, symptoms exhibited, and the code stored, it will help you to arrive at a diagnosis.

You may also need to obtain diagnostic flow charts, wiring diagrams, connector face views, connector pinout charts, component locations, and component testing procedures/specifications from the vehicle information source. All this information will be needed to correctly diagnose the stored code P2457.

You must always start with a visual inspection of the wiring harnesses and connectors which are related with the EGR temperature sensor and the exhaust temperature sensor. Make sure to carefully check harnesses that are in close proximity to hot exhaust pipes and manifolds. Load test the battery, inspect battery terminal ends, battery cables, and alternator output before proceeding.

After that the next step would be to connect the scanner to the automobile and retrieve all stored codes as well as freeze frame data at this time. This information should be recorded down because you may need it if this proves to be an intermittent code.

Then carefully observe the data stream of the scanner to decide whether there was actual EGR cooling taking place. Narrow the data stream to include only pertinent information for a quicker and more correct data response. If the scanner would indicate that actual temperature inputs are as per the specifications, then it would mean that there is some fault in the PCM or a PCM programming error.

If the EGR temperature sensor data is erratic or it is not as per the parameters, then check the sensor following manufacturer’s recommendations. Restore the sensor if it fails to coincide with manufacturer’s specifications. If the sensor is in good working condition, then start testing EGR temperature sensor circuitry. All the associated controllers should be disconnected before testing with the DVOM. Repair or replace the open or shorted circuits as per the requirement.

Now if the EGR temperature sensor electrical system is performing normally, then an infrared thermometer should be used to check exhaust gas temperature at the EGR cooler inlet and the EGR cooler outlet (with the engine running and at normal operating temperature). Compare your findings with manufacturer’s specs and the defective components should be replaced as per the need.

Common Mistakes When Diagnosing The P2457 Code

• The most common mistake when diagnosing the cause of the P2457 code is to automatically replace the EGR cooling system parts.
• The people should carefully inspect other components of the system before replacing any part