Guide To P2287 OBD Error Code Solutions

<<See All OBD Codes

Wondering on how to diagnose the error code P2287? Don’t know where to look from? No worries, Parts Avatar is here to the rescue! Join us in this ride to solve the error code P2287. This error code P2287 "Injector control pressure sensor circuit intermittent" is a diagnostic trouble code that is generic in nature. This code is stored when the engine control module (ECM) notifies that the injector control pressure (ICP) sensor is intermittently not recording a return signal to the engine control module (ECM).

When the engine control module detects that the ICP is not transmitting a return voltage signal intermittently, the error code P2287 is set. Well, due to this intermittent sensor signal, the fuel injection system fails to function correctly. Also, the driver is likely to face problems with the functioning of the engine and drivability issues when the sensor is not giving a return voltage.

What causes this problem with the Injector Control Pressure Sensor Circuit Intermittent?

• The wiring or the connectors in the ICP sensor having short circuits or defects
• Internal short circuit in the ICP sensor
• An intermittent open in a damaged ECM
• A reduced oil or fuel level
• Malfunctioning oil pump
• A defect in the fuel pump
• An erroneous PCM
• Open control module ground strap
• A faulty fuse or fuse-able link (only if valid)

Next important thing you need to know about are the common symptoms for this obd error code An illuminated check engine light and the error code P2287 set in the memory of the ECM:

Common symptoms

• Rough engine or regular stalling (if the fuel control circuit is not fixed on time)
• Lean running
• Engine misfires
• The ICP failing to send a signal to the ECM for processing and fuel control

Wish to correct this error code with your vehicle? Do you know what all you should do to make your car free from this code? Well, don’t worry! We are here to guide you:

• Repair or replace a damaged ICP sensor if not functioning as per the requirements
• All the wirings and connections to the ICP sensor and the engine control module, if defective should be mended or restored
• A malfunctioning engine control module should be repaired or replaced

Apart from the fuel injector, you might need to undergo few more replacements. You might need injector pressure sensor, fuel injector, injector pressure regulator, oil pump, fuel pump control module, PCM, fuel able link, engine light, oil and many other parts. Where to get them from? Well, if you want quality parts, then we can prove to be your dream destination.

Here’s how you can diagnose the error code P2287 with these simple steps that you need to follow:

In order to diagnose the error code P2287, all you need to do is follow these simple steps. Begin the procedure with the thorough visual inspection of the electrical components. Next, the mechanic should scan for the codes and should document the code in the ECM. refer to the freeze frame data for any failures. The ICP sensor should be checked for the presence of appropriate voltage return to the engine control module. The scanner ICP PID should also be observed while the procedure is being performed. Then the mechanic should proceed to tap the sections of the ICP wiring and connectors in order to figure out the root cause of the problem. The ICP sensor should be checked too while duplicating the fault.

Common Mistakes When Diagnosing the P2287 Code

Here we have listed a few common mistakes that should be avoided while diagnosing the error code P2287:

• Failing to check the freeze frame data before clearing the codes stored in the ECM memory
• Not being able to follow the pinpoint tests
• Wiring problems (a failure in checking the problem thoroughly for the intermittent fault)
• Often replacing the ICP falsely, without figuring out the actual cause