Error Code P217E: What It Means & What To Do?

<<See All OBD Codes

Terrorized? Don’t know what to do next? Parts Avatar has got your back! Here we have written all that you need to know about the error code P217E. This diagnostic trouble OBD-II code engine may run rough is described as a fuel injector group “H” supply voltage circuit low. The signal to the fuel injectors is controlled by the engine computer (PCM) in two groups. If one or both of the fuel injectors are detected to not be functioning properly by the PCM, it will set code P217E. The two injectors in that group will be required to be shut down so that no damage is done to additional components.

The available general description for the P217E code is fuel injector group ‘H’ supply voltage circuit low, although various manufacturers offer a different description to the customers. Presently, there is no further information available about the OBD-II error code P217E. 

What Causes this problem with Fuel Injector Group "H" Supply Voltage Circuit Low?

• Distorted fuel injector group 'H'
• Short circuited or disconnected fuel injector group 'H' harness
• Fuel injector group 'H' circuit deficient electrical connection

1. Fuel Injector - Short circuited or loose fuel injectors can harm the overall performance of the engine along with an error code P217E. Tune into Parts Avatar for top notch fuel injectors offered as economical prices.
2. Fuel Injector Harness - Now get your error code P217E fixed easily by simply changing your fuel injector harness as this adversely affects the overall drivability of the vehicle.
3. Connectors - Weary and damage connectors can often be problematic. So, to add some spark to your ride you definitely need the perfect quality connectors offered at Parts Avatar. Isn’t that just the perfect deal?
4. Engine Control Module - A distorted engine control module can end up being the chief host inviting the error code P217E. So, replacing one can be one of the wisest decisions to avoid a problematic system.
5. Powertrain Control Module - Stressed because of an error code P217E? A defect powertrain control module is likely to invite issues like a poorly running engine, increase in carbon emission, choking, stuttering and stalling of the engine. Well, to avoid these, we recommend a replacement or repair of the powertrain control module before it worsens the condition of the system.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD code P217E here:

Common Symptoms

• An illuminated check engine light or service engine soon warning light

After understanding the symptoms and few common causes behind the OBD error code, we are here to help you out in understanding the ways and means to correct the issue. To solve any issue you need to follow certain steps, and to solve OBD error code P217E, you will need to undergo the following replacements:

• Make sure you perform steps to replace or repair a defective fuel injector group 'H'
• Ensure that steps are performed to mend or restore all the corroded or loose fuel injector group 'H' harness
• Amendments should be performed a bad electrical connection in the fuel injector group 'H' circuit

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced fuel injector group “H”, fuel injector group “H” harness, fuel injector, powertrain control module, engine control module and a lot more to help you out in fixing your car.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P217E code to be stored:

It should be noted that if you spot smoke or steam emitting from the underneath the hood, this should be taken as a confirmation for the error code P217E being stored. There are also possibilities of wrongly set ignition timing that will require readjustments. All the disconnected drive belts under the hood should be tightened or should be replaced completely. If in case, you notice pool of fluid under the car, then a failure in the cylinder head gasket should be suspected. This can be confirmed if you see surging smoke being blown from the exhaust system. There are other causes too that stimulate the storage of the error code P217E like a contaminated MAF sensor that might cause the car to over add to its fuel-trim adjustments. Consequently, the oxygen sensors are most likely to report problems with the fuel mixture due to this.

Common Mistakes When Diagnosing the P217E Code

Here we have listed only for our customers the common mistakes that should be avoided while performing the diagnosis procedure:

• A damaged fuel injector
• A malfunction in the powertrain control module (PCM)
• Wiring issue in the system