Error Code P2113: What It Means & What To Do?

<<See All OBD Codes

The P2113 error refers to the reduced engine performance which is generally known as throttle/pedal position sensor ‘B’ minimum stop performance. The opening of the throttle valve is usually controlled by the electronic throttle control system. The amount of power which the driver needs from the engine is sent as signal from the accelerator pedal position sensor to the ECM when he presses the accelerator pedal. The P2113 error will be set, if a fault is detected by the PCM in the ETCS. The available power from the engine will be limited so as to stop unnecessary acceleration when the engine is pushed into ‘limp home mode’ by the PCM.

The position of the throttle and the depressing of the gas pedal is communicated to the engine control module where the throttle/ pedal position sensor ‘B’ is utilized along with other sensors. It is used to analyze several other things like throttle percentage, engine load and so on. The P2113 error will be set when the ECM identifies a fault. When the error is found, you will find the CEL on the dashboard. Apart from the check engine light, you will also find the fail safe mode. Until the issue is solved and the operation is normal, the fail-safe mode will remain in the vehicle.

What causes this problem with the Throttle/Pedal Position Sensor B Minimum Stop Performance?

• The wiring harness might be open or shorted.
• Failure of the throttle control motor.
• Throttle position sensor might turn out to be defective.
• The electrical connection might be very weak.
• Malfunctioning of the pedal position sensor.

1. Engine Wiring Connectors – The damaged engine wiring connectors have to be replaced quickly as they connect various components to the engine. Fix it soon to avoid P2113 error.
2. Pedal Position Sensor – If your vehicle experiences a sudden surge in the highway as you drive, then the pedal position sensor can be faulty. Replace the faulty pedal position sensor as soon as possible.
3. Throttle Position Sensor – Sudden jerking by your vehicle shows the failure of the throttle position sensor. Get rid of it immediately by replacing it with a new TPS from PartsAvatar.
4. Engine Light – If the engine light malfunctions, then it will keep showing up in the display dashboard. Get it replaced as soon as possible to avoid the P2113 error.
5. Engine Control Module – Conditions of misfire shows that your ECM is faulty. Fix it as soon as possible to avoid the P2113 error in your vehicle by getting a new ECM from PartsAvatar.
6. Powertrain Control Module – Conditions of misfire and stalling of the vehicle are the popular symptoms of a faulty PCM. Do you find these symptoms in your vehicle? Then, replace the faulty PCM instantly.

For us our customers are everything, and that’s why we will help you to diagnose P2113 code by mentioning some important symptoms below:

Common Symptoms

• The engine performance might be very low.
• The engine might move into the ‘limp home mode.

After you know the symptoms of your vehicle’s problem, it becomes easy to detect it and get started with solving it. So, next on our list is a few common steps to correct this issue with your vehicle’s.

• The damaged throttle control motor needs replacement.
• Fixing the weak electrical connection.
• Changing the faulty TPS.
• Replacing the broken pedal position sensor.
• Repairing or fixing the worn out engine wires.

To do all this, you will need a few high-quality auto parts such as the engine wiring harness, fuel injector, engine light, body control module, ECM, injection pump, pcm module, ecm module and so on. From where will you get them? From your local store? Well, why go there when you can order quality parts with us while sitting in the comfort of your home. So, just browse through our website and order your needed parts today.

Here are some steps which you should follow in order to diagnose this fault code P2113:

• Firstly, the mechanic will use a scan tool to see if there are any history of codes or stored codes in the engine control module.
• For each and every code, the freeze frame data must be checked to see under which condition the vehicle was present when the error code was set in the vehicle.
• Now each of the codes must be cleared.
• Test drive your vehicle by trying to duplicate the condition under which the vehicle was, when the code was set.
• Re-examine your vehicle again for any stored error codes in the engine control module. If the P2113 error still exists then carry out the following steps.
• Visually examine for any damaged/ defective components or if there are any broken wires.
• Check the sensor ‘B’ with the help of a scan tool as well as its data streams, while operating the throttle and gas pedal.
• Finally, use a multimeter to check for voltage which is available at the sensor.

Common Mistakes When Diagnosing the P2113 Code

While diagnosing the P2113 error code, it is possible to easily commit a mistake if the steps are not followed in a logical order or if they are incomplete. Performing a diagnosis of modern cars which has an electrical system that is advanced can lead down to several ways if proper care is not taken.