P2103 OBD Error Code: Problem & Solutions
OBD Code P2103 - Throttle Actuator A Control Motor Circuit High
Is the car engine not performing at par with the
expectations? Do you notice affected fuel economy, delayed throttle response
and Check Engine Light illuminated on the dashboard? This can be an indication
of the problem the throttle response system of the vehicle, resulting in OBD
code P2103 getting stored in the Powertrain Control Module (PCM).
Learn More About OBD Error Code P2103
This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code. The P2103 trouble code would indicate that a throttle actuator “A” control motor circuit signal which is not as per the predetermined limit has been detected by the ECM. Now when this would occur, the fault code would be stored and there would be an illumination in the malfunction indicator light.
What causes this problem with the Throttle Actuator A Control Motor Circuit High?
- Defaults in the throttle actuator control (TAC) module
- Throttle actuator control (TAC) module harness might be opened or shorted
- There can be bad electrical connection in the throttle actuator control (TAC) module circuit poor
- Throttle plate sticking due to carbon build-up
- There can be distorted engine control module (ECM)
Replace/Repair These Parts To Fix Code P2103
- Pedal
Position Sensor - If the APP sensor is not
working properly, then it would also lead to some issues related with fuel
efficiency. Get it replaced before the situation gets worse.
- Engine Control
Module -
Is your car engine light still staying ON after resetting or your car engine is
turning off for no reason? Then these are some common symptoms indicating that
your car engine control module is defective.
- Throttle
Position Sensor - Did
you just face sudden engine stalling without any apparent reason? Don’t waste
time as it is an indication that there are some quirks in your throttle
position sensor. Don’t waste time and get it
replaced or else P2103 code can turn up.
- Powertrain Control
Module -
The PCM works as the central computer system in an automobile’s mechanism. This
auto part is the in charge of all the constituents as well as the functions
performed by them. Having such enormous importance in the operation of all the
parts means that any defect in it will affect almost every aspect of a car.
- Electronic Control
Unit - The ECU is a major component of
your car's onboard computer. It's used to regulate many systems and subsystems
in your car's engine, drive train and other major components. Visit us to buy
best quality ECU online.
- Diagnostic Tools – Take help of a professional mechanic to diagnose OBD
code error. Use high grade diagnostic tools to resolve this issue. Buy new
tools and equipment form us!
Symptoms Of The OBD Error Code P2103
Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P2103 code by mentioning some major symptoms below:
Common Symptoms
- Illumination in the service engine soon light
- Uneven or less idle
- Issues related to car engine stalling
- Problem of surging
- The acceleration might be very less
- Presence of some other symptoms as well
- Decreasing engine performance
How To Correct P2103 Throttle Actuator A Control Motor Circuit High
Have a look at some ways with which you can correct the P2103 code:
- It is essential to restore the flawed throttle control motor
- Rehabilitate the defaults in the throttle position sensor circuit
- The malfunctioning powertrain control module should be repaired or replaced as per the need
- Carefully adjust the faults in the accelerator pedal position assembly
- The TPS circuit should be restored to working order
There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of ETCS, APPS, PCM, Throttle plate, limp home mode, TSB, Bulkhead, Terminals, DVOM Service and many more. Now all your problems would vanish within no time.
Easy Diagnosis Of Engine Error OBD Code P2103
Here are some steps which you should follow in order to diagnose this P2103 fault code:
- Use an OBD-II scanner in order to verify that the code is present, and check for other codes for any other type of error or problem that might need attention.
- The current data along with freeze frame data are recorded, and the codes are then cleared to see if they reoccur.
- The vehicle is inspected for any problems with the wiring and connectors to check for loose connections, corrosion, or shorts.
- The tests related to the throttle position sensor and components may help pinpoint the problem, as well as inspection of the current sensor and cut off switch will further helping the cause.
- The P2103 error is triggered if there is a physical problem with the throttle position sensor which could cause the engine performance to go off.
Common Mistakes When Diagnosing The P2103 Code
- There can be a lot of issues which might appear when the P2103 error code start flashing up.
- Many a times the mechanic might not react properly and would just replace the throttle position sensor when in reality the simpler components should be checked first properly.