P2059 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P2059 can be explicated as Reductant Injection Air Pump Control Circuit/Open. If the engine control module would detect a variation in the voltage coming from the reductant injection air pump control circuit delivered performance that is outside the parameters set by the automobile manufacturer, then it would store the P2059 fault code. This would give rise to the flashing up of the check engine light.

Do you want to gain some more knowledge about the P2059 trouble code? This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model. The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile.

What causes this problem with the Reductant Injection Air Pump Control Circuit/Open?

• Reductant injection air pump harness is not shut or tiny
• There might be poor electrical connection in the reductant injection air pump circuit
• Faulty SCR controller
• Malfunctioning reductant air pressure sensor
• There can be inoperative reductant injection air pump

1. Engine Control Module - Want to know the most common reason behind the failure in the engine control module? Corrosion or damage because of moisture can cause ECM failure. Corrosion might enter the ECM through the wiring harness and moisture can enter by a failure in the seals in the ECM itself.
2. Engine Wiring Harness - Your car ECM would not operate properly if there are some cracks or break in the engine wiring harness. Corrosion as well as physical damage are the most common reasons why you should replace an engine wiring harness. Purchase high grade engine wiring harness online from Parts Avatar Canada.
3. Oxygen Sensor - The O2 sensor is mounted in the exhaust manifold to monitor how much unburned oxygen is in the exhaust as the exhaust exits the engine. Monitoring oxygen levels in the exhaust is a way of gauging the fuel mixture. Thus, replace faulty O2 sensor now!
4. Automatic Transmission Module - Faulty transmission module can cause problematic down shifts and upshifts, leading to stalling while accelerating or slowing down. This can also hamper many transmission system parts. Thus, replace it now!
5. Powertrain Control Module - The PCM makes the engine and transmission work in tandem. Any issue with the powertrain control module will cause major problems with the efficient running of the vehicle.
6. Fuel Injector - The fuel injectors are important component of the fuel delivery system that helps in proper utilization of the fuel entering the engine. This not only helps in taking care of the air to fuel ratios in the engine, helping the combustion process but also enhances the performance. Thus, replace faulty injector now!
7. Electronic Control Unit - If your vehicle fails to start for no apparent reason, this is also a good indicator that there can be some issues with the ECU. If you check the car battery, starter and other common electrical components, and the vehicle still does not start, a quirky electronic control unit should be the next logical thing to consider.
8. Diagnostic Tool - In order to fix these errors, you need few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come handy to do so and resolve all your vehicle problems. Visit today!

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P2059 here:

Common Symptoms

• Check engine light might come into signal
• The exhaust emission may be richer than anticipated
• The vehicle might not clear any emission tests due to the check engine light being on.
• Depletion in fuel efficiency
• Reduced engine performance

There might be some other SCR associated codes

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• The malfunctioning ECM should be repaired or replaced as per the need
• It is essential to restore the flawed connector pins of corrosion or loose connections at the reductant injector and air pump
• Repair or replace the quirky reductant injection air pump harness
• Rehabilitate the defaults in the reductant injection air pump circuit
• The air pump should be restored to working order

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced air pump, diesel exhaust fluid, OBD code scanner, def fluid, obd2 code reader, electronic control module and a lot more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

• This is a general type of error code which is diagnosed with the help of a scanner.
• The mechanic will insert a scanner to diagnostic port of the vehicle and recover the codes and freeze frame data.
• If he happens to find any additional error codes, he has to address them as well.
• Once it is done, he has to reset the vehicle, and then test drive to see if the error code appears.
• If the error code does not return, then there can be an erratic condition.
• He should scan and document the codes in the ECM; and the search for the corresponding freeze frame data for the defect.
• Inspect the air pump wiring connections for issues like loose or corroded connections.
• It is very essential to examine the resistance of the air pump.
• The manufacturer pinpoint tests should be followed for the diagnosis as well as the reductant injector and air pump should be restored.
• Whenever the mechanic or a trained professional, repairs any of the component like wires or connectors, he will reset the code and test drive the vehicle again to see if the error code appears again.
• This can actually help the mechanic to know if the problem is fixed.

Common Mistakes When Diagnosing The P2059 Code

• The mechanic might clear the ECM memory codes before carefully inspecting the freeze frame data for the main failure problem, so because of that the failure may be duplicated and repaired.
• Another big mistake can be failing to clear the ECM codes after the codes are fixed so the ECM will enable the system to work normally again.