P0C50 OBD Error Code: Problem & Solutions

It is always good to learn more! That is the reason why we are here to help you out in gaining more knowledge about the P0C50 error code. The drive motor "A" position sensor circuit is being monitored by the motor control module. This trouble code would be set by the motor control module when the drive motor "A" position sensor circuit would not be as per the specifications set by the manufacturer. The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile.

What causes this problem with the Drive Motor "A" Position Sensor Circuit "A"?

• Some flaws in the hybrid vehicle motor
• Hybrid vehicle motor harness might be opened or sometimes shorted
• Hybrid vehicle motor circuit might have inadequate electrical connection
• Malfunctioning HV control ECU

1. Engine Control Module - There can be some engine performance issues due to faulty engine control module. If the ECM fails or has any problems it can lead to performance issues with the vehicle like misfires, hesitation, loss of power, and sometimes even decreased fuel economy.
2. Generator Assembly - Some common symptoms of bad generator assembly are weak or dead car battery, weird smells and the warning light on the dashboard might start illuminating. It would be nice if you get it replaced on time.
3. Powertrain Control Module - PCM stands for powertrain control module. It is a car part, a control unit which is utilized on motor vehicles. It is generally a combined control unit, consisting of the engine control unit (ECU) and the transmission control unit (TCU).
4. HVAC Blower Motor Control Module - If there is a failure in the blower motor resistors’ internal components, then it might cause the HVAC blower motor control module to malfunction, or it might not function at all on one or more of the settings. Get it replaced before the situation gets worse.
5. Electronic Control Unit - If your automobile's check engine light remains on constantly, and never goes off, there's a good chance that your vehicle has a damaged electronic control unit. There are a lot of reasons why a car's check engine light will remain on. The most common reason is a defective ECU.
6. Motor Assembly - One of the most common causes of the failure in the motor assembly can be due to neglecting oil changes. Remember that oil is the lifeblood for engines. You can always rely on us as we have best auto parts for our customers.
7. Diagnostic Tools - It is always advisable to use correct tools and equipment while resolving any OBD code issue as even small mistakes can lead to wrong diagnosis. Thus, always take help from a professional who has the knowledge and experience to such tools in efficient manner. Buy new quality diagnostic tools from us today.

Our main motive is to achieve customer satisfaction as for us our customers are everything and that’s why we will help you to diagnose P0C50 code by mentioning some major symptoms below:

Common Symptoms

• The service engine soon light can start lighting up

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0C50:

• Make sure to mend the faulty hybrid vehicle motor
• It is essential to restore the flawed hybrid vehicle motor harness
• Rehabilitate the defaults in the hybrid vehicle motor circuit
• The ECM/PCM should be restored to working order
• Recondition the non-functioning drive motor generator
• It is necessary to perform proper service of the unsound motor position sensor
• Adjust the flawed drive motor output shaft

However, if you face any issue then we have stocked a wide range of best priced powertrain control module, ecm module, motor control module, battery generator and more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

• This is a general type of error code which is diagnosed with the help of a scanner.
• The mechanic will insert a scanner to diagnostic port of the vehicle and recover the codes and freeze frame data.
• If he happens to find any additional error codes, he has to address them as well.
• Once it is done, he has to reset the vehicle, and then test drive to see if the error code appears.
• If the error code does not return, then there can be an erratic condition.
• Then the mechanic has to check the wires, connectors and other electrical components and quickly replace them if he finds them to be damaged or defective.
• Check for the damaged drive motor ‘A’ position sensor and its components for error. It the mechanic finds the fault in the connectors in relation to the battery, replace it immediately.
• Also check for the particular battery cells emitting high voltages and thus might need battery replacement as well.
• Some smoke or steam might start getting emitted from underneath the car hood. The ignition timing could be set wrongly and there would be a need to adjust it properly. If, when looking under the hood, you notice that the drive belts appear loose, they need to be tightened or completely replaced.
• Parts or components should not be replaced with reference to only a P0C50 DTC. The vehicle service manual should be consulted for more information on possible causes of the fault, along with required testing.
• If all the components seems to work perfectly, inspect the PCM for faults and replacement along with reprogramming.

Common Mistakes When Diagnosing The P0C50 Code

• Non performance of the drive motor generator assembly