Error Code P0C34: What It Means & What To Do?
OBD CODE P0C34 - Hybrid Battery Temperature Sensor "F" Circuit Range/Performance
It is important to know that the wrong battery
temperatures will affect the engine performance in terms of acceleration and
ride quality. Also affected by the sluggish throttle response and the braking
risk, the OBD code P0C34 error code gets stored in the PCM indicating
problematic hybrid battery temperature sensor “F” circuit issue.
Learn More About OBD Error Code P0C34
This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.
What causes this problem with the Hybrid Battery Temperature Sensor "F" Circuit Range/Performance?
- Problematic hybrid battery thermistor
- Battery smart unit failure
- Faulty, open or shorted battery connectors and wiring harness
- Damaged electrical connection to the battery temperature sensor and thermistor
- Powertrain Control Module faults
Replace/Repair These Parts To Fix Code P0C34
- Battery Current Sensor - Most of the time the battery current sensor is faulty and is unable to detect the battery operations properly and thus the reading doesn’t correlate with the temperature sensor readings, causing OBD code P0C34 to get stored in the PCM
- Battery Coolant Pump - It is important to understand the functioning and diagnosis of faulty coolant pump as it is the most important component for keep the battery temperatures under control and keeping it functional all the time. Thus replace fault battery coolant pump now!
- Powertrain Control Module - Faulty PCM should be repaired, replaced and reprogrammed as it can cause a lot of problems in the vehicle by affecting the engine performance along with the transmission, fuel delivery and exhaust systems.
- Hybrid Battery - The battery itself can be faulty and can be overheating, which can lead to faster discharge and slower charging, with risks of leakages and other damages to the vehicle. Thus, immediate replacement is advisable.
- Car Battery & Cables - Most of the time it is the cables and connector that are at fault and are a cheap and easy way diagnose this error. Thus replace faulty wiring and connectors immediately.
- Diagnostic Tool - Make use of quality diagnostic tools to resolve any OBD error code. Buy quality diagnostic tools from us!
- Battery Temperature Sensor - Temperature sensor measure the battery temperature so that it can be monitored for overheating and other problems in association with the battery. Thus it is important for the temperature sensor to keep working properly and must be replace, if found faulty.
Symptoms Of The OBD Error Code P0C34
Interested in knowing the symptoms to obd code P0C34? If yes, then you have arrived at the right place. We at Parts Avatar have listed out few common symptoms associated with Hybrid Battery Temperature Sensor "F" Circuit Range/Performance.
Common Symptoms
- Malfunction Indicator Light On
- Sluggish acceleration
- Lights and electrical components not working properly
- PCM and ECU faults
How To Correct Hybrid Battery Temperature Sensor "F" Circuit Range/Performance
Have a look at some ways with which you can correct the P0C34 code:
- Replace the defective hybrid battery temperature sensor harness
- Replace faulty battery thermistor
- Repair or replace the quirky battery interface control module (BICM)
- Rehabilitate the defaults in the hybrid battery temperature sensor wiring and connectors
- Check and repair the faults in the hybrid battery temperature sensor circuit
There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of Hybrid Battery Thermistor, Hybrid Battery Pack, Engine Control Unit, Battery Temperature Sensor, High Voltage Battery Assembly, High Voltage Battery Interface Control Module and many more. Now all your problems would vanish within no time.
Easy Diagnosis Of Engine Error OBD Code P0C34
It is essential to diagnose this fault code. Here are some steps which a
mechanic should follow for diagnosing the problem that triggered a P0C34 code
to be stored:
- The mechanic or the technician will use a diagnostic scanner or code
reader like DVOM to visually scan for the error codes in the vehicle.
- After performing a careful inspection, every of the stored codes and
freeze frame data are retrieved as it can help down the way for further
diagnosis process.
- Most often he has to inspect the solenoid itself to see if they are
faulty or damaged. Additional error codes that are stored in the vehicle are
also addressed.
- The mechanic performs a continuity test between the PCM and solenoid to
check the resistance.
- If the solenoid or the control modules are not faulty, he will then
retune the code and test drive the vehicle.
- On test driving, if the P0C34 code does not return soon, he will know
that an erratic condition exits.
- But if the error returns instantaneously, he will check every components
of the control module as well as the circuit like connectors, wires, harness,
fuses etc. for any possible fault.
- If any component is damaged, he will fix them right away.
- After performing this repair, he will inspect the transmission fluid as
well as its level.
- If the level is below the manufacturer’s specification, it has to be
refilled and if the fluid is murky or contaminated it needs to be replaced.
- Every time a repair work is carried out, make sure that the mechanic
test drives the vehicle after every repair so that the diagnosis is successful.
This can eventually help him to know as to where the error occurred.
Common Mistakes When
Diagnosing the P0C34 Code
- PCM and ECU failure
- Wiring and connectors damaged, broken or short
- Hybrid battery temperature sensor failure