P0C24 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0C24 can be explicated as Auxiliary Transmission Fluid Pump Control Module Circuit Low. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

The brighter you are, the more you have to learn! That’s why we are here to provide you more knowledge about the P0C24 trouble code. It is the engine control module which would examine the auxiliary transmission fluid pump. This trouble code would be set by the ECM when the auxiliary transmission fluid pump would not be as per the parameters set by the manufacturer.

What causes this problem with the Auxiliary Transmission Fluid Pump Control Module Circuit Low?

• Imperfect auxiliary transmission fluid pump
• Issue of unbolted auxiliary transmission fluid pump harness
• Unacceptable electrical connection in the auxiliary transmission fluid pump circuit

1. Fluid Pump - If the fluid pump is physically damaged, it can result in leakages, loss of pressure and harsh shifting. Thus, the fluid pump must be replaced, if found damaged. Buy new fluid pump from us now!
2. Engine Control Module - The solenoid might cause a short in the engine control module because of corrosion in the solenoid or the wire running from the solenoid to the ECM harness.
3. Electronic Control Unit - The ECU power management control module keeps in check the hybrid battery charging functions. If the ECU is faulty, the battery pack will not be able to properly get charged and thus, the ECU might need replacement.
4. Fluid Pump Control Module - Faulty fluid pump control module will result in the fluid pump not working properly. This will cause transmission issue and erratic behaviours. Replace faulty control module immediately.
5. Battery - If the battery is not functioning properly, the may overheat and underperform. Also, it may have difficulty in charging and might discharge fast. Thus, replacements are in order. Buy new battery now!
6. Powertrain Control Module - A trouble with the PCM would mean that it is unable to determine the right fuel mixture and would send the car engine either more or less fuel than it requires. Now when the engine gets more, the carbon emission would increase and fuel economy would drop. In case of the opposite, the engine will choke, stutter, and might start stalling sometimes.
7. Diagnostic Tool - Usually any OBD code problem requires deep insight into the problem and high-grade tools in order to fix it properly. Thus, buy quality diagnostic tools form us!

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0C24 here:

Common Symptoms

• Illumination in the service engine soon light
• Car engine might start stalling or may fail
• There can be some issues related to the performance of the car engine
• Automobile may not begin at all

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0C24:

• Repair or replace the quirky electronic control unit
• Rehabilitate the defaults in the auxiliary transmission fluid pump harness
• The malfunctioning engine control module should be repaired or replaced as per the need
• Carefully adjust the faults in the auxiliary transmission fluid pump
• The auxiliary transmission fluid pump circuit should be restored to working order

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced fluid pump, fluid pump control module, PCM, connectors, battery connectors, engine control module and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

• Make sure that the auxiliary transmission fluid pump is in good condition. Some people think that it is an obvious step, but if your computer does not get a steady feed of electricity from the battery, it can cause multiple issues.
• Check for wires and connectors that might be rubbed through, disconnected or loose. It is also important to check the fuse box in your vehicle together with the relay centre that can be found under the hood.
• It is also important to make sure that the fuses are good. Make sure that there is no melted plastic that can cause fire.
• These are some of the major wiring problems that you will encounter with error code P0C24. Once you have completely checked all the obvious things and still you can’t find the right solution, then you have to begin suspecting either the computer or the sensor.

Common Mistakes When Diagnosing The P0C24 Code

• Quirks in the auxiliary transmission fluid pump control module
• Issues related with the car wiring