P0C22 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0C22 can be described as Auxiliary Transmission Fluid Pump Phase U-V-W Circuit High. The error code P0C22 would start triggering when the PCM would detect some fault in auxiliary transmission fluid pump. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

Don’t worry if P0C22 error code is triggering again and again. We offer wide range of auto parts at affordable prices to our dear customers. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code. The P0C22 trouble code would indicate that an auxiliary transmission fluid pump which is not as per the predetermined limit has been detected by the ECM. Now when this would occur, the fault code would be stored and there would be an illumination in the malfunction indicator light.

What causes this problem with the Auxiliary Transmission Fluid Pump Phase U-V-W Circuit High?

• Defaults in the auxiliary transmission fluid pump
• Auxiliary transmission fluid pump harness is open or shorted
• Auxiliary transmission fluid pump circuit poor electrical connection

1. Motor Control Module - The motor control module is responsible for coordinating with all the associated components for the proper functioning of the drive motor. If the module feels that the transmission system is not working properly, then it might instruct the PCM to store OBD code P0C22 in the system.
2. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
3. Transmission Fluid Pump - The first indication of any transmission related problem will the illumination Check Engine Light. Other major symptoms indicating bad transmission fluid pump can be bad shifts, delayed response and fuel burning smell from under the hood. Thus, immediate replacement is advisable.
4. Transmission Fluid Pump Harness - Damaged transmission fluid pump harness can cause problematic transmission performance and can lead to transmission slipping, rough shifts, fuel leakages and delayed engagements. Buy new harness now!
5. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is the in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
6. Electronic Control Unit - The ECU is a major component of your car's onboard computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.
7. Motor Generator Power Inverter Control Module - If the control module senses that the transmission fluid pump is not working properly, causing delayed shifts, transmission slippage and other performance issue, then the module may cause the OBD code to occur.
8. Diagnostic Tools - Take help of a professional mechanic to diagnose OBD code error. Use high grade diagnostic tools to resolve this issue. Buy new tools and equipment form us!

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0C22 code by mentioning some major symptoms below:

Common Symptoms

• Illumination in the service engine soon light
• Immovable automobile

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0C22:

• Make sure to mend the faulty auto transmission fluid pump
• It is essential to restore the flawed auxiliary transmission fluid pump harness
• Rehabilitate the defaults in the auxiliary transmission fluid pump circuit
• The malfunctioning auxiliary transmission fluid pump should be repaired or replaced as per the need
• Carefully adjust the faults in the auto transmission oil pump
• Recondition the non-functioning PCM/ECM
• It is necessary to perform proper service of the unsound electronic control unit

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of engine control module, transmission fluid pump, automatic transmission fluid pump harness, motor control module boot, automatic transmission oil cooler pump, transmission cooler pump and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• Use an OBD-II scanner in order to verify that the code is present, and check for other codes for any other type of error or problem that might need attention.
• The current data along with freeze frame data are recorded, and the codes are then cleared to see if they reoccur.
• The vehicle is inspected for any problems with the wiring and connectors to check for loose connections, corrosion, or shorts.
• The tests related to the auxiliary transmission fluid pump and components may help pinpoint the problem, as well as inspection of the current sensor and cut off switch will further be helping the cause.
• The P0C22 error is triggered if there is a physical problem with the auxiliary transmission fluid pump which could cause the engine performance to go off.

Common Mistakes When Diagnosing The P0C22 Code

• There can be a failure in the drive motor generator power inverter control module
• Defaults in the auxiliary transmission pump