Error Code P0C1A: What It Means & What To Do?

<<See All OBD Codes

What does the P0C1A error code signify? How does this error gets stored in the vehicle? Keep reading and you will find the solution. The drive motor ‘B’ torque delivered performance is usually referred to the high voltage system which does not function normally. The drive motor ‘A’ is usually monitored by the engine control module. If the drive motor ‘A’ is not up to the factory expectation, then the engine control module (ECM) will set the error code in the vehicle.

The drive motor generator power inverter module looks after the drive motor that is the electric motor. If the drive motor fails to generate the requested power, then the P0C1A error will be set in the vehicle where the hybrid system will be deactivated by the drive motor generator power inverter module. Due to excessive braking condition, this error code will be set in the vehicle.

What causes this problem with the Drive Motor "B" Torque Delivered Performance?

• Damaged drive motor.
• There might be an opening or the drive motor harness might have a short circuit.
• The electrical connection of the drive motor circuit might be weak.

1. Generator - Generators are used for charging the battery and it supplies power to the electrical system when the engine is running. A damaged generator needs quick replacement so that the vehicle functions smoothly.
2. Power Inverter - The power inverter allows you to draw a limited amount of power from the battery where you can connect your phone chargers. At times these power inverters can be damaged and they must be quickly replaced to avoid P0C1A error.
3. Electric Motor - Too much over driving can cause the electric motor to overburn and it gets self-destructed. Are you facing troubles with your faulty electric motor? Then it’s high time to get a new electric motor from Parts Avatar
4. Engine Wiring Connectors - The engine wiring connectors are usually made of copper which might likely get corroded as time goes by. P0C1A error can be avoided if the eroded engine wiring connectors are replaced or repaired.
5. Engine Control Module - The engine control module is considered to be the brain of the engine management system. So, if your ECM is not functioning properly, then an immediate replacement is needed so that the system functions normally.
6. Powertrain Control Module - A faulty PCM can cause misfiring issues and the engine behaviour might also be erratic. If your vehicle is causing misfiring issues, then it is because of a faulty powertrain control module. Shop them from Parts Avatar at best prices online

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0C1A code by mentioning some major symptoms below:

Common Symptoms

• The engine light will remain the same or it will keep blinking.
• The vehicle might face issue while trying to move.

Have a look at some ways with which you can correct the P0C1A code:

• If the wires or the connectors are shorted, you have to replace or repair them as needed. You may even find the reluctant injector air controller to be defective if there is no voltage in the sensor connector and if the system circuitries are performing normally.
• This can actually help you to know if the malfunctioning is irregular or not. Once every code is cleared, you have to see if the codes return by test driving the vehicle.
• Get the hydraulic pressure diagram which relates to the vehicles and attach it to one end of the gauge into the correct opening of the transmission housing so that you can record the pump pressure correctly.
• If every of the system circuits, sensors and as well as the transmission is in proper working condition, then you can expect the powertrain control module to be faulty. But you must always keep in mind that a faulty PCM is a very rare case and if you are replacing them, you have to reprogram the PCM.

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of drive motor, generator, power inverter, electric motor, engine control module, powertrain control module, engine wiring connectors, yamaha generators and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this P0C1A fault code:

• Firstly, you have to turn off the opposite pairs of cylinders which have the original multi-displacement system so that the engine will have three different formations and displacements.
• The diagnostic procedure for P0C1A error code is elaborate which might show trouble codes in the air conditioning display.
• However, the system was problematic and it was misinterpreted by the customers. As a result, many of the unbelievable failures made the technology to quickly retire.
• You will hear strange noises from the turning radiator fan and as well as the belt which rotates the fan blade.
• You will find several other devices which are driven by a belt under the hood.
• All of these belts are driven by the engine pulley which is placed on the engine of an automobile.
• The serpentine belt is generally a belt which is available in every car so that it can drive multiple peripheral devices.
• The error code, P0C1A can also be activated by other trouble codes that are available down the lane.
• For instance, a murky MAF sensor might make your car to overreact in the adjustments of fuel trim.
• As an end result, you will likely find the oxygen sensor with some fuel mixture issues.

Common Mistakes When Diagnosing the P0C1A Code

• Failure of the drive motor generator power inverter.
• Excessive braking issues.
• Engine faces internal issues.

P0C19 - Drive Motor "A" Torque Delivered Performance