Error Code P0C16: What It Means & What To Do?

<<See All OBD Codes

The trouble code P0C16 can be described as Drive Motor “B” Inverter Phase W Over Temperature. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things. The drive motor “B” inverter phase W over temperature is being monitored by the engine control module. This trouble code would be set by the ECM when the drive motor “B” inverter phase W over temperature would not be as per the specifications set by the manufacturer.

Error code P0C16 flashing? We have a wide range of automobile parts and accessories. We won’t let you down in any way as for us our customers are everything. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

What causes this problem with the Drive Motor “B” Inverter Phase W Over Temperature?

• There might be less coolant level in the hybrid cooling system reservoir
• Malfunctioning coolant pump

1. Generator Assembly - The generator assembly unit is responsible for proper functioning for the hybrid motor. Thus, if any component if faulty or damage the vehicle can stall and might not even start. It can also experience poor acceleration and transmissions and loss of power. Thus, it is important to replace faulty components.
2. Motor Assembly - There are three general symptoms of a failing motor assembly. Worn, faulty, or broken motor mounts might give rise to clunking, banging, and other impact type sounds as a result of the weight of the engine shifting around. So, make sure to replace it with a new one. You can always rely on us as we have best auto parts for our customers.
3. Engine Control Module - It is not always the components, but the ECM that can also be faulty. It can cause misinterpretation of correct data thus leading to wrong operational decisions which will affect the transmission and overall engine performance. Thus, replace faulty module and reprogram it now!
4. Powertrain Control Module - Powertrain Control Module can also be faulty in rare cases and thus needs through checks for system and software errors. Thus, check and replace it, if required.
5. Diagnostic Tools - It is always advisable to use correct tools and equipment while resolving any OBD code issue as even small mistakes can lead to wrong diagnosis. Thus, always take help from a professional who has the knowledge and experience to such tools in efficient manner. Buy new quality diagnostic tools from us today!

We care for our customers and that’s why we can totally understand your problem. That’s the reason why we have listed out some major symptoms behind the flashing up of OBD Code P0C16. They are mentioned here as follows:

Common Symptoms

• Check engine light can start flashing up
• The high voltage system might not function correctly

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0C16:

• Make sure to mend the faulty hybrid cooling system reservoir
• It is essential to restore the flawed engine control module
• Repair or replace the quirky coolant pump

Now are you thinking that from where will you purchase these car parts? You have arrived at the right place. We at Parts Avatar care for our customers, that’s why we provide best quality of car cooling system parts, coolant pump, motor control module, hybrid powertrain control module at marketable prices.

Do you wish to diagnose P0C16 error code easily? Here are some steps which you should follow in order to diagnose this fault code:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the drive motor “B” inverter itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• Now when the car is taken out for a test drive, if the P0C16 code does not return soon, he will know that there is an existence of erratic condition.

Common Mistakes When Diagnosing The P0C16 Code

• Failure in the drive motor generator power inverter control module