Error Code P0BFB: What It Means & What To Do?

<<See All OBD Codes

Is the hybrid vehicle motor assembly faulty? Is the ECM damaged? Then the P0BFB error might be stored in your vehicle. This error code is usually known as drive motor "B" phase w current sensor circuit low. The high voltage system and drivetrain components are regulated and is monitored by the drive motor generator power inverter control module. Self-check will be carried by the module to make sure that it performs correctly. The P0BFB error might get stored if a fault is found.

A rotating magnetic field will be created by MG2 as the 3-phase alternating current goes through the three phase windings of the stator coil. Corresponding to the rotating position and speed of the rotor, the magnetic field rotation is operated by the system. Hence, the permanent magnets which are available in the rotor will be pulled together in the direction of rotation, which produces a torque. The created torque will always be proportional to the amount of current present. By changing the frequency of the alternating current, the MG2 speed will be looked after by the system. To produce high current during high speed, the system will appropriately control the rotating magnetic field as well as the angle of the rotor magnets.

What causes this problem with Drive Motor "B" Phase W Current Sensor Circuit Low?

• Defective hybrid vehicle motor assembly.
• The hybrid vehicle motor assembly harness might have an opening or short circuit.
• The hybrid vehicle motor assembly circuit might have a weak electrical connection.

1. Hybrid Vehicle Motor Assembly - The faulty hybrid vehicle motor assembly needs immediate fixation for the engine to run smoothly and to avoid the P0BFB error in the vehicle.
2. Hybrid Vehicle Motor Assembly Harness - Is the hybrid vehicle motor assembly harness damaged? Get the replacement for damaged generator assembly from Parts Avatar at best prices online.
3. Engine Control Module - The engine performance will be poor and there will be a drop-in fuel economy if the engine control module malfunctions. Replace it immediately.
4. Powertrain Control Module - The engine will fail to start or the fuel economy will be poor if the powertrain control module is faulty. Get them replaced by getting a new one from PartsAvatar as soon as possible.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0BFB here:

Common Symptoms

• The warning light of the service engine or the engine light might be flashing.

Here are some ways with the help of which you will be able to correct the OBD Code P0BFB

• Defective hybrid vehicle motor has to be changed.
• Powertrain control module and the engine control module has to be repaired.

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade hybrid vehicle motor assembly, hybrid vehicle motor assembly harness, inverter control module and a lot more for our precious customers.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0BFB code to be stored:

• This type of error usually signals that an error has taken place in the reprogramming process.
• It is always best to leave it to the professionals as there are several circuits involved in this process.
• You will have to remove the transmission pan and look for the presence of clutch materials and other debris if the fluid smells or appears to be burnt.
• Some of the reasons for the low pump pressure can be blocked hydraulic passages, a faulty pump, a damaged shift solenoid, and other clutch materials.
• As you put your foot on the brakes of the car, you can likely expect your car to slow down or it might even come to a stop position.
• The amount of power that is applied on the brake pedal by your foot is aided with the help of hydraulic pressure.
• The force from your foot will engage with the piston and caliper where the brake pads are fixed (bonded abrasive and heat resistant metal or ceramic) so that you can apply pressure on the rotor.
• The OBD -II error code P0BFB is usually related to the cam that is camshaft timing.
• In one such scenario, if the timing of the cam is over- retarded then the illumination of the check engine light will take place and the error code P0BFB will get stored in the vehicle.

Common Mistakes When Diagnosing the P0BFB Code

• Inverter control module might be defective.
• Problem with the electrical wires.