Guide To P0BF1 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0BF1 can be explicated as Drive Motor ‘B’ Phase U Current Sensor Circuit. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.

There would be a generation of a rotating magnetic field in MG2 when three-phase alternating current would flow through the three-phase windings of the stator coil. The system would control the rotation of the magnetic field in accordance with the rotating position and speed of the rotor. Then the permanent magnets provided in the rotor would be pulled in the direction of rotation, generating torque.

What causes this problem with the Drive Motor ‘B’ Phase U Current Sensor Circuit?

• Some flaws in the hybrid vehicle motor assembly
• Hybrid vehicle motor assembly harness might be opened or sometimes shorted
• Hybrid vehicle motor assembly circuit might have inadequate electrical connection

1. Hybrid Drive Cooling Pump - The cooling pump play a major role in keeping the battery temperatures under control and ensuring proper functioning. If the pump gets damaged, it can lead to increased temperatures that can hamper many starting and charging parts. Thus, replace it immediately, if found damaged.
2. Inverter Cooler Pump - The inverter cooler pump maintains a cool environment for the hybrid battery to operate properly. Without the cooler pump working properly, the battery might overheat and malfunction. Thus, if the inverter cooler pump is not working properly, inspect for damages and replace it now!
3. Hybrid Battery - A failing hybrid battery can be disastrous for the system. It triggers a whole lot of issues related to MPG, the state of charge, sudden drop in battery bars etc. So, in order to avoid them we advise you to change your hybrid battery as soon as possible. Tune into Parts Avatar.
4. Engine Control Module - ECM failures and faults can be very difficult to find and resolve as these are very rare and might require a complete reprogramming of the system to avoid wrong codes from getting stored in the system, leading to misdiagnosis. Replace it now!
5. Powertrain Control Module - Faulty PCM can disrupt the normal functioning of the vehicle by affecting the transmission system and the fuel delivery system. This will cause the system to store wrong OBD error and thus can lead to misdiagnosis.
6. Diagnostic Tools - Take the help of a professional mechanic to diagnose OBD code error. Use high grade diagnostic tools to resolve this issue. Buy new tools and equipment form us!

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0BF1 here:

Common Symptoms

• Check engine light might come into signal

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• The flawed hybrid vehicle motor assembly should be restored properly
• Rehabilitate the defaults in the hybrid vehicle motor assembly circuit
• The hybrid vehicle motor assembly harness should be restored to working order

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced ecu, battery relay, hv control ecu, battery relay harness, battery relay switch, hv battery, pcm car, hybrid vehicle motor assembly, inverter control module, hybrid vehicle motor assembly harness, ecm car and engine control module and a lot more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

• This is a general type of error code which is diagnosed with the help of a scanner.
• The mechanic will insert a scanner to diagnostic port of the vehicle and recover the codes and freeze frame data.
• If he happens to find any additional error codes, he has to address them as well.
• Once it is done, he has to reset the vehicle, and then test drive to see if the error code appears.
• If the error code does not return, then there can be an erratic condition.
• But, if the error code returns, then the mechanic has to check the Drive Motor ‘B’ Phase U Current Sensor Circuit.
• If the Drive Motor ‘B’ Phase U Current Sensor Circuit is defective, then it has to be replaced.
• Also, the mechanic can check for any sign of defects in the related parts, then he should quickly fix the issue.
• Then the mechanic has to check the wires, connectors and other electrical components and quickly replace them if he finds them to be damaged or defective.
• If the issues are not yet sorted out, then the mechanic will use a digital voltmeter/ ohmmeter and connect it to the vehicle.
• Once the circuit is inspected, he will thoroughly check all the harness and repair them accordingly.
• In most cases, this error code can arise mostly because of any shorted wires or faults in the Drive Motor ‘B’ Phase U Current Sensor Circuit.
• Whenever the mechanic or a trained professional, repairs any of the component like wires or connectors, he will reset the code and test drive the vehicle again to see if the error code appears again.
• This can actually help the mechanic to know if the problem is fixed.

Common Mistakes When Diagnosing The P0BF1 Code

• There can be some issues in the drive motor generator power inverter control module
• Wiring related issues