P0BE6 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0BE6 can be defined as Drive Motor "A" Phase U Current Sensor Circuit Range/Performance. The error code P0BE6 would start triggering when the PCM would detect some fault in drive motor phase current sensor. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

The motor temperature sensor detects the temperature of the transaxle fluid. The resistance of the thermistor installed in the motor temperature sensor varies with the changes in the transaxle fluid temperature. The construction in the motor sensor “A” and how it is connected to the HV control ECU are the same as those of the motor sensor “B”.

When a failure is detected in the Drive Motor Phase Current Sensor circuit, the engine control module (PCM) will set code P0BE6.

What causes this problem with Drive Motor "A" Phase U Current Sensor Circuit Range/Performance?

• Malfunctioning drive motor current sensor
• Motor current sensor harness might be unlocked
• Motor current sensor circuit might have bad electrical connection

1. Diesel Particulate Filter - The diesel particulate filter acts as an important component in managing the particulate emissions in the exhaust system. If the filter is damaged, it may lead to increased emissions and pollutants through the tailpipe. Thus, replace damaged filter now!
2. Engine Control Module - It is not always the components, but the ECM that can also be faulty. It can cause misinterpretation of correct data thus leading to wrong operational decisions which will affect the transmission and overall engine performance. Thus, replace faulty module and reprogram it now!
3. Exhaust System Parts - Your exhaust system begins at the engine with the purpose of removing toxic gases and fumes from your vehicle. The components are a series of pipes, catalytic converters, sensors, mufflers, and often a resonator, as well as other emission devices. Thus, replace damaged exhaust system now!
4. Powertrain Control Module - Powertrain Control Module can also be faulty in rare cases and thus needs through checks for system and software errors. Thus, check and replace it, if required.
5. Electronic Control Unit - The ECU manages the cooling system to control the battery operating temperatures and thus must be replaced if found faulty. Thus, buy new ECU modules and components from us!
6. Diagnostic Tool - Make use of quality diagnostic tools to resolve any OBD error code. Buy quality diagnostic tools from us!

For us our customers are everything, and that’s why we will help you to diagnose P0BE6 code by mentioning some important symptoms below:

Common Symptoms

• Check engine light might come into signal
• Operation of the high voltage system might not be possible
• Automobile might not work properly

After understanding the symptoms and few common causes behind the OBD error code, we are here to help you out in understanding the ways and means to correct the issue. To solve any issue, you need to follow certain steps, and to solve OBD error code P0BE6, you will need to undergo the following replacements:

• You must fix the defective motor assembly
• Make sure to mend the faulty drive motor temperature sensor harness
• It is essential to restore the flawed temperature sensor circuit
• Repair or replace the quirky PCM
• Carefully adjust the faults in the automatic transmission module

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced Hybrid Vehicle Motor Assembly, Hybrid Vehicle Motor Assembly harness and a lot more to help you out in fixing your car.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• Use an OBD-II scanner in order to verify that the code is present, and check for other codes for any other type of error or problem that might need attention.
• The current data along with freeze frame data are recorded, and the codes are then cleared to see if they reoccur.
• The vehicle is inspected for any problems with the wiring and connectors to check for loose connections, corrosion, or shorts.
• The tests related to the hybrid battery and components may help pinpoint the problem, as well as inspection of the current sensor and cut off switch will further be helping the cause.
• The P0BE6 error is triggered if there is a physical problem with the battery which could cause the engine performance to go off.

Common Mistakes When Diagnosing The P0BE6 Code

Some issues related to the drive motor generator power inverter control module