Guide To P0BD9 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0BD9 can be described as Drive Motor Inverter Temperature Sensor “D” Circuit High. With the help of multiple sensors, the temperature of each battery cell is carefully looked after by the hybrid battery pack. If an unlikely signal is reported by at least one of the battery temperature sensors, a P0BD9 error code will be set. The disabling of a high voltage system will occur if multiple sensors fail. The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile.

There would be a generation of a rotating magnetic field in MG2 when three-phase alternating current would flow through the three-phase windings of the stator coil. The system would control the rotation of the magnetic field in accordance with the rotating position and speed of the rotor.

What causes this problem with the Drive Motor Inverter Temperature Sensor “D” Circuit High?

• Malfunctioning inverter with converter assembly
• Inverter with converter assembly harness might be unlocked
• Inverter with converter assembly circuit might have bad electrical connection
• Quirks in the HV Control ECU

1. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
2. Hybrid Battery - Faulty hybrid battery may overheat or discharge quickly, causing drivability issues. It can affect the acceleration and throttle response and can also cause damage to various parts. Replace the faulty hybrid battery now!
3. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
4. Electronic Control Unit - The ECU is a major component of your car's onboard computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.
5. Diagnostic Tool - Find high grade diagnostic tools to detect the OBD error code from us. Visit us today to grab amazing deals.
6. Battery Temperature Sensor - Faulty temperature sensor can misinterpret the battery temperatures which can result in battery overheating and leakages inside the battery that can harm various components and can be dangerous to driver’s safety also. Thus, replace it at first instance.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0BD9 code by mentioning some major symptoms below:

Common Symptoms

• Illumination in the service engine soon light

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0BD9:

• It is essential to restore the flawed inverter with converter assembly harness
• Repair or replace the quirky inverter with converter assembly
• Rehabilitate the defaults in the inverter with converter assembly circuit

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of battery control module, hybrid vehicle motor assembly, inverter control module, hybrid vehicle motor assembly harness, hybrid battery, pcm, ecm, ecu, pcm module and ecm module and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• Check for wires and connectors that might be rubbed through, disconnected or loose. It is also important to check the fuse box in your vehicle together with the relay centre that can be found under the hood.
• It is also important to make sure that the fuses are good. Make sure that there is no melted plastic that can cause fire.
• These are some of the major wiring problems that you will encounter with error code P0BD9.
• Carefully inspect the Drive Motor ‘B’ Phase U Current Sensor Circuit and make sure to repair or replace it if found faulty.
• Once you have completely checked all the obvious things and still you can’t find the right solution, then you have to begin suspecting either the computer or the sensor.

Common Mistakes When Diagnosing The P0BD9 Code

• Defaults in the inverter/converter assembly
• Some issues related to the wiring