P0BB0 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0BB0 can be explained as Hybrid Battery Voltage Sense “X” Circuit Low. One can observe a total of 288 cells making up the hybrid/electric vehicle battery pack. Welded together in uniformity, there are groups of three cells formed. An aggregate of 96 cell groups are present in the hybrid/EV battery pack assembly. These individual cell groups are ranked at 3.7V for a nominal system voltage of 355 V direct current. Further the groups can be seen branched into three individual sections. The battery section one holds the first 90 cells/30 cell groups. This section is situated near to the cowl and consists of batteries ranging from 67 to 96. Next is the battery section two (found behind the section one) composed of 72 cells/24 cell groups and contains batteries 43 to 66. Lastly, the section number three is known as the transverse battery section. Constituting the remaining 126 cells/42 cell groups, it contains batteries from 1 to 42. All the three battery sections can be serviced individually. 

The battery energy control module performs the function of monitoring the voltage of the 96 battery cell groups through the four hybrid/EV battery interface control modules. There are also voltage sense circuits that are connected to each individual cell group. Ending at a connector located on the top surface of the battery section, each of these sense circuits are connected to individual cell group. The codifying of the voltage reading is done by the hybrid/EV battery interface control module and is further transmitted by the battery control harness to the battery energy control module. One hybrid/EV battery interface control module is positioned over the battery sections one and two, and two hybrid/EV battery interface control modules are connected with battery section three. The list of components that can be serviced include the hybrid/EV battery interface control module, battery energy control module wiring harness, auxiliary battery wiring harness, and battery energy control module. A pack of mini-batteries all connected together all present in the high voltage battery pack. Whenever, there is a defect detected by the high voltage control module in one or more than one battery packs that are there in the high voltage battery assembly, the code P0BB0 is stored by the high voltage control module.

What causes this problem with the Hybrid Battery Voltage Sense “X” Circuit Low?

• Some issues related to the hybrid/electric vehicle battery pack
• Quirks in the hybrid/electric vehicle battery interface control module

1. Inverter Cooler Pump - As part of the cooling system, the inverter coolant pump translates high-voltage direct current generated by hybrid batteries into alternating current for the motor to keep the system at the proper operating temperature. Thus, if the cooler pump if faulty, it should be replacing immediately.
2. Hybrid Battery - A hybrid battery that has dead traction can be very problematic. It can result into a delayed or instant release of gases that are toxic or flammable. We recommend you to change it instantly without taking the risk of touching it as it may lead to a shock.
3. Engine Control Module - If there is any corrosion or breaks in the internal wiring of the harness, then it can cause a short in the ECM or can also cause corrosion in the ECM through the wiring harness. You can always rely on us as we have the best auto parts for our customers.
4. Battery Temperature Sensor - A symptom commonly associated with a failing battery temperature sensor is an engine that surges during operation. The battery temperature sensor helps the system continuously adjusts the system voltage, and if it fails, this process may be disturbed. Thus, replace it now!
5. Powertrain Control Module - The onboard computer, or powertrain control module is the brain of the engine control system. Now if the brain is not working properly, then neither is the car engine. Get it replaced before the situation gets worse.
6. Electronic Control Unit - Is your car jump starting on reverse polarity? Or are you facing some intermittent starting issues? If yes, then it indicates that your electronic control unit is bad. So, it is very important to replace the defective electronic control unit with us at equitable prices.
7. Diagnostic Tool - Use high grade diagnostic tools and equipment to resolve OBD code error. Buy new tools and equipment form us now!

There could be countless symptoms that would accompany this fault code. Willing to know some common symptoms of OBD Trouble Code P0BB0? Your wish is our demand. Have a look at them below:

Common Symptoms

• Check engine light might come into signal 
  

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• You must fix the defective hybrid/electric vehicle battery pack
• It is necessary to perform proper service of the unsound PCM/ECM
• Recondition the non-functioning hybrid/electric vehicle battery interface control module

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of HV battery temperature sensor, HV battery assembly, hybrid battery pack cooling fan, HV battery assembly harness, hv battery, pcm, ecm, ecu, pcm module, ecm module and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0BB0 code to be stored:

After verifying the P0BB0 code with an OBD-II scanner, the mechanic should begin with a visual inspection of all electrical components, especially looking for some issues in the Hybrid Battery Voltage Sense “X” Circuit. Any issues should be repaired, and the code should be cleared from the system. If the code reappears after a retest, the mechanic should then move on to performing voltage tests and resistance tests on the sensor, and comparing the information to the manufacturer’s specifications. If the readings are within the correct limits, then the sensor needs to be replaced. However, if the readings are not within the correct limits, then the issue lies elsewhere. The mechanic should continue checking each possible cause, clearing the code and retesting the system after each attempt, to be sure that the correct solution is found.

Common Mistakes When Diagnosing The P0BB0 Code

• There can be a failure in the high voltage battery connection
• Quirks in the high voltage battery assembly
• Flaws in the wiring