Error Code P0B97: What It Means & What To Do?

<<See All OBD Codes

The trouble code P0B97 can be explained as Hybrid Battery Voltage Sense “S” Circuit Low. Are you experiencing sluggish performance and acceleration? Is there a problem with the engine performance and affected fuel economy? All this with lights keeping stayed on due to high voltage may be due to vehicle battery problems leading to OBD code P0B97 error getting stored in the PCM.

Do you want to know more about the P0B97 fault code? Don’t worry! Parts Avatar Canada is here at your service. The hybrid battery is being monitored by the engine control module. This trouble code would be set by the PCM when the hybrid battery would not be as per the specifications set by the manufacturer.

What causes this problem with the Hybrid Battery Voltage Sense "S" Circuit Low?

• ECU and PCM failures
• Hybrid battery pack damaged
• Battery Interface Control Module faulty
• Hybrid battery pack harness opened or shorted
• Hybrid battery pack circuit poor electrical connection

1. Battery Current Sensor - Defective car Battery Current Sensor can be a major reason why P0B97 code depicts. So make sure to replace it online so that you don’t have to face any further issues.
2. Car Battery - Everything is okay with the ECM and still OBD code P0B97 triggering? Then there must be some defects in Car Battery. Replace them as soon as possible.
3. Battery Coolant Pump - P0B97 code flashing? Get your Battery Coolant Pump inspected from a mechanic.
4. Engine Control Module - If everything is alright with Battery Coolant Pump, then there is surely some defect in Engine Control Module. Get it replaced before the situation gets worse.
5. Powertrain Control Module - P0B97 code can display due to some issues in the Powertrain Control Module. So it is very important to replace the Powertrain Control Module with us at equitable prices.
6. Hybrid Battery - Do you remember when was the last time you got your car Hybrid Battery checked up? A dirty Hybrid Battery can cause a lot of issues like displaying P0B97 code.
7. Electronic Control Unit - Are there some faults in your Electronic Control Unit? Don’t waste time and get them replaced or else P0B97 code can turn up.
8. Exhaust Manifold – Inspect for faulty exhaust manifold and replace it if found so. Buy new components from us now!

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0B97 here:

Common Symptoms

• Sluggish Acceleration
• Vehicle Engine not starting
• Electrical components not working properly
• Malfunction Indicator Light On
• Increased exhaust emission and temperatures

After understanding the symptoms and few common causes behind the OBD error code, we are here to help you out in understanding the ways and means to correct the issue. To solve any issue you need to follow certain steps, and to solve OBD error code P0B97, you will need to undergo the following replacements:

• Make sure to fix the defective car battery
• Fix the faulty hybrid battery pack switch
• Restore the flawed hybrid battery pack circuit
• Rehabilitate the defaults in the battery current sensor
• The malfunctioning hybrid battery should be repaired or replaced as per the need
• Repair or replace exhaust manifolds faults, if required
• Hybrid battery connectors and wiring replacement
• Check and replace oxygen sensor, if found faulty

Apart from the fuel injector, you might need to undergo few more replacements. You might need spark plugs, throttle bodies, oxygen sensors, intake manifold and many other parts. Where to get them from? Well, if you want quality parts, then we can prove to be your dream destination.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0B97 code to be stored:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• Now when the car is taken out for a test drive, if the P0B97 code does not return soon, he will know that there is an existence of erratic condition.

Common Mistakes When Diagnosing The P0B97 Code

• There can be a failure in the battery contactor assembly
• Battery wiring and connector issues
• Powertrain Control Module faults
• Defaults in the battery energy control module