Guide To P0B89 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0B89 can be described as Hybrid Battery Voltage Sense "P" Circuit High. There are 288 cells in the hybrid/electric vehicle battery pack. There is a group of three cells which are properly welded together in a parallel direction. The hybrid/EV battery pack assembly contains 96 cell groups in total. They are then connected together in series electrically. Every specific cell group is rated at 3.7 V for a nominal system voltage of 355 V direct current. The battery cells are grouped in the form of three sections.

Don’t worry if P0B89 error code is triggering again and again. We offer wide range of auto parts at affordable prices to our dear customers. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.

What causes this problem with the Hybrid Battery Voltage Sense "P" Circuit High?

• Unusable hybrid/electric vehicle battery pack
• Quirks in the hybrid/electric vehicle battery interface control module
• There can be inoperative car battery
• PCM/ECM might be flawed

1. Auxiliary Battery Relay - It is an important auto part which needs full care. A faulty Auxiliary Battery Relay can be a reason behind the flashing up of P0B89 code.
2. Hybrid Battery - Do you remember when was the last time you got your car Hybrid Battery checked up? A dirty Hybrid Battery can cause a lot of issues like displaying P0B89 code.
3. Engine Control Module - Poor Engine Control Module can cause a lot of difficulties, so why not get it replaced at time?
4. Car Exhaust System Parts - Are there some faults in your Car Exhaust System Parts? Don’t waste time and get them replaced or else P0B89 code can turn up.
5. Car Battery - OBD Code P0B89 can appear because of faulty Car Battery. Purchase high grade Car Battery online.
6. Exhaust Manifold - Everything is fine with Car Battery and still P0B89 code triggering? Then you must get your Exhaust Manifold checked.
7. Powertrain Control Module - There can be some issues with the Powertrain Control Module due to which you may see P0B89 code appearing over and over again. Visit us to buy best quality PCM online.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0B89 code by mentioning some major symptoms below:

Common Symptoms

• Appearance of the service engine soon light
• Electrical components not working properly
• Improper acceleration
• Braking issues
• The fuel consumption might start increasing

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are

some ways with the help of which you will be able to correct the OBD Code P0B89:

• Recondition the non-functioning hybrid/electric vehicle battery interface control module
• It is necessary to perform proper service of the unsound hybrid battery
• Rehabilitate the defaults in the PCM
• Carefully adjust the faults in the hybrid/electric vehicle battery pack

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of battery assembly, ecu, ecm module, pcm module and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• Use an OBD-II scanner in order to verify that the code is present, and check for other codes for any other type of error or problem that might need attention.
• The current data along with freeze frame data are recorded, and the codes are then cleared to see if they reoccur.
• The vehicle is inspected for any problems with the wiring and connectors to check for loose connections, corrosion, or shorts.
• The tests related to the hybrid battery and components may help pinpoint the problem, as well as inspection of the current sensor and cut off switch will further helping the cause.
• The P0B89 error is triggered if there is a physical problem with the battery which could cause the engine performance to go off.

Common Mistakes When Diagnosing The P0B89 Code

• High voltage battery connection might start failing
• Some issues related to the high voltage battery assembly
• Issues with the car wiring