P0B82 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0B82 can be described as Hybrid Battery Voltage Sense "I" Circuit Range/Performance. This code is a generic trouble code, meaning it applies to all vehicles equipped with the OBD-II system, especially those made from 1996 up to present. It’s also more common among Audi, Citroen, Chevrolet, Ford, Hyundai, Nissan, Peugeot, and Volkswagen vehicles. Specifications on the definition, troubleshooting, and repairs, of course, vary from one make and model, powertrain configuration type, to another.

Error code P0B82 flashing? Steer to our amazing website for a wide range of automobile parts and accessories. We won’t let you down in any way as for us our customers are everything. Visit us as fast as you can. There are 288 cells in the hybrid/electric vehicle battery pack. There is a group of three cells which are properly welded together in a parallel direction. The hybrid/EV battery pack assembly contains 96 cell groups in total. They are then connected together in series electrically. Every specific cell group is rated at 3.7 V for a nominal system voltage of 355 V direct current. The battery cells are grouped in the form of three sections.

What causes this problem with the Hybrid Battery Voltage Sense "I" Circuit Range/Performance?

• Some issues related to the hybrid/electric vehicle battery pack
• The hybrid/electric vehicle battery interface control module might be flawed
• ECU and PCM failures

1. Engine Control Module - There can be some issues with the ECM due to which you may see P0B82 code appearing over and over again. Visit us to buy best quality ECM online.
2. Auxiliary Battery Relay - Common cause behind this P0B82 error code can be some fault in Auxiliary Battery Relay. So it will be a good decision to replace them now.
3. Exhaust Manifold - A lot of issues can arise do to defective Exhaust Manifold. Did you just see P0B82 code flashing? Now you know the reason why it is appearing. Get it inspected and replaced on time.
4. Powertrain Control Module - Faulty Powertrain Control Module can be the reason why P0B82 code is flashing. Visit us to purchase top notch Powertrain Control Module online.
5. Car Exhaust System Parts - It is an important auto part which needs full care. Faulty car exhaust system parts can be a reason behind the flashing up of P0B82 code.
6. Car Battery - OBD Code P0B82 can appear because of faulty Car Battery. So why not replace it with a brand new one online?
7. Hybrid Battery - There can be some issues with the Hybrid Battery due to which you may see P0B82 code appearing over and over again. Visit us to buy best quality Hybrid Battery online.

We care for our customers and that’s why we can totally understand your problem. That’s the reason why we have listed out some major symptoms behind the flashing up of OBD Code P0B82. They are mentioned here as follows:

Common Symptoms

• There can be an illuminated engine light
• Sluggish acceleration
• Vehicle engine might not start
• Electrical components not working properly

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0B82:

• Make sure to mend the faulty auxiliary battery relay
• Rehabilitate the defaults in the engine control module
• The malfunctioning hybrid/electric vehicle battery interface control module should be repaired or replaced as per the need
• Carefully adjust the faults in the hybrid/electric vehicle battery pack
• The hybrid battery should be restored to working order
• Adjust the flawed car exhaust system parts

Now are you thinking that from where will you purchase these car parts? You have arrived at the right place. We at Parts Avatar care for our customers, that’s why we provide best quality of battery assembly, ecu, ecm module, pcm module at marketable prices.

Do you wish to diagnose P0B82 error code easily? Here are some steps which you should follow in order to diagnose this fault code:

The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle. After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process. Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed. The mechanic performs a continuity test between the PCM and solenoid to check the resistance. If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle. Now when the car is taken out for a test drive, if the P0B82 code does not return soon, he will know that there is an existence of erratic condition.

Common Mistakes When Diagnosing The P0B82 Code

• The high voltage battery connection might start failing
• Non observance of the high voltage battery assembly
• Some issues with the car wiring