P0B80 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0B80 can be explicated as Hybrid Battery Voltage Sense "N" Circuit. It is important to know that the wrong battery voltage will affect the engine performance as well as the fuel economy. Also affected by the sluggish acceleration and the braking risk, the OBD code P0B80 error code gets stored in the PCM indicating problematic hybrid battery “N” voltage circuit issue.

The brighter you are, the more you have to learn! That’s why we are here to provide you more knowledge about the P0B80 trouble code. If a voltage difference between the battery blocks exceeds the standard readings, the battery smart unit determines that malfunction has occurred and the OBD P0B80 occurs. Thus, the powertrain control module will illuminate the malfunction indicator lamp (MIL) and set a diagnostic trouble code in the system thus leading to vehicle going into limp mode.

What causes this problem with the Hybrid Battery Voltage Sense "N" Circuit Intermittent/Erratic?

• There can be some issues in the battery smart unit
• The HV battery assembly might be quirky
• The hybrid/electric vehicle battery pack might not be functioning properly
• Defective hybrid/electric vehicle battery interface control module
• Weak car battery
• PCM/ECM failure

1. Car Exhaust System Parts - There can be some issues with the Car Exhaust System Parts due to which you may see P0B80 code appearing over and over again. Visit us to buy best quality Car Exhaust System Parts online.
2. Powertrain Control Module - Are you facing some faults in your Powertrain Control Module? Don’t worry and get them replaced or else P0B80 code can turn up.
3. Engine Control Module - Common cause behind this P0B80 error code can be some fault in Engine Control Module. So it will be a good decision to replace them now.
4. Hybrid Battery - Engine Control Module is perfectly fine but still but having that trouble code P0B80 flashing? In such a situation your Hybrid Battery might be faulty. Why don’t you think of getting that replaced?
5. Auxiliary Battery Relay - A broken Auxiliary Battery Relay can cause a lot of issues. It would be nice if you get it replaced on time.
6. Exhaust Manifold - The P0B80 code can also arise due to some issues in Exhaust Manifold. So it is advised to replace them as soon as possible.
7. Car Battery - P0B80 code does not really end up spoiling your Exhaust Manifold, but it might also accompany few Car Battery issues. We have best Car Battery with us.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0B80 here:

Common Symptoms

• An engine light flashing (or service engine soon warning light)
• Rise in the fuel consumption
• Sluggish engine as well as lot of noise

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0B80:

• The malfunctioning hybrid/electric vehicle battery interface control module should be repaired or replaced as per the need
• Carefully adjust the faults in the hybrid battery
• Rehabilitate the defaults in the hybrid/electric vehicle battery pack
• The ECM/PCM should be restored to working order
• Adjust the flawed electronic control unit

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced battery assembly, ecu, ecm module, pcm module and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

First of all you have to make sure that the battery cable connections are tight and clean. Some people think that it is an obvious step, but if your computer does not get a steady feed of electricity from the battery, it can cause multiple issues. Check for wires and connectors that might be rubbed through, disconnected or loose. It is also important to check the fuse box in your vehicle together with the relay centre that can be found under the hood. It is also important to make sure that the fuses are good. Make sure that there is no melted plastic that can cause fire. These are some of the major wiring problems that you will encounter with error code P0B80. Once you have completely checked all the obvious things and still you can’t find the right solution, then you have to begin suspecting either the computer or the sensor.

Common Mistakes When Diagnosing The P0B80 Code

• Malfunctioning high voltage battery connection
• There can be a failure in the high voltage battery assembly
• Wiring problems