Guide To P0B51 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0B51 can be explained as Hybrid Battery Voltage Sense "E" Circuit Low. The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

1. Powertrain Control Module - A faulty Powertrain Control Module can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Car Battery - If everything is alright with PCM, then there is surely some defect in Car Battery. Get it replaced before the situation gets worse.
3. Hybrid Battery - Do you remember when was the last time you got your car Hybrid Battery checked up? A dirty Hybrid Battery can cause a lot of issues like displaying P0B51 code.
4. Engine Control Module - Are there some faults in your Engine Control Module? Don’t waste time and get them replaced or else P0B51 code can turn up.
5. Auxiliary Battery Relay - There can be some issues with the Auxiliary Battery Relay due to which you may see P0B51 code appearing over and over again. Visit us to buy best quality Auxiliary Battery Relay online.
6. Exhaust Manifold - P0B51 code can display due to some issues in the Exhaust Manifold. So it is very important to replace the Exhaust Manifold with us at equitable prices.
7. Car Exhaust System Parts - Everything is fine with Engine Control Module and still P0B51 code triggering? Then you must get your Car Exhaust System Parts checked.

Do you want to know more about the P0B51 fault code? Don’t worry! Parts Avatar Canada is here at your service. The voltage of the 96 battery cell groups is monitored by the battery energy control module through the four hybrid/EV battery interface control modules. The voltage sense circuits are joined with every specific cell group, and then the sense circuits would terminate at a connector which is situated on the top surface of the battery section.

What causes this problem with the Hybrid Battery Voltage Sense "E" Circuit Low?

• Malfunctioning battery smart unit
• Imperfect HV battery assembly
• Powertrain control module faults

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P0B51? Your wish is our demand. Have a look at them below:

Common Symptoms

• An illuminated engine light (or service engine soon warning light) may be observed
• Sluggish acceleration
• Affected fuel economy
• Lights and electrical components not working properly

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• Recondition the non-functioning HV battery assembly
• It is essential to restore the flawed hybrid battery
• Repair or replace the quirky powertrain control module
• Rehabilitate the defaults in the exhaust system parts
• Adjust the flawed battery smart unit

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of ecu, custom exhaust, prius battery and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0B51 code to be stored:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• On test driving, if the P0B51 code does not return soon, he will know that an erratic condition exits.
• But if the error returns instantaneously, he will check every components of the car hybrid battery for any possible fault.
• If any component is damaged, he will fix them right away.
• After performing this repair, he will inspect the car battery as well.
• Every time a repair work is carried out, make sure that the mechanic test drives the vehicle after every repair so that the diagnosis is successful. This can eventually help him to know as to where the error occurred.

Common Mistakes When Diagnosing The P0B51 Code

• There can be a failure in the high voltage battery connection
• Defaults in the high voltage battery assembly
• Some issues related to the wiring
• PCM and ECU failure