Error Code P0B41: What It Means & What To Do?

<<See All OBD Codes

It is important to know that the wrong battery voltage will affect the engine performance as well as the fuel economy. Also affected by the sluggish acceleration and the braking risk, the OBD code P0B41 error code gets stored in the PCM indicating problematic hybrid battery “B” voltage circuit issue.

This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.

What causes this problem with the Hybrid Battery Voltage Sense "B" Circuit Range/Performance?

• Problematic Hybrid Battery Pack
• Faulty, open or shorted battery connectors and wiring harness
• Damaged electrical connection to the battery
• Powertrain Control Module faults

1. Battery Current Sensor – Faulty battery current sensor will affect the performance of the vehicle and thus might need replacement. Buy new Battery Current Sensor now!
2. Car Battery – If the car battery is damaged, the electrical components of the vehicle will not work properly or might not work at all. Replace faulty car battery today!
3. Battery Coolant Pump – It is important to regulate the battery temperatures to keep it functioning properly. Buy new battery coolant pump from us!
4. Engine Control Module – If the ECM is faulty, the vehicle will not operate properly and might also lead to wrong diagnosis. Thus, replace old components now!
5. Powertrain Control Module – If all the components are functioning properly, then the PCM can itself be at fault. Buy new PCM components now!
6. Hybrid Battery – The major reason behind OBD code P0B41 getting stored in the faulty hybrid battery. Thus, replace it now!
7. Electronic Control Unit – If the OBD code P0B41 is flashing, always remember to check the ECU itself for faults. Buy new ECU from us!

1. Starter Motor – The engine will have problems with starting and will stall with the starter motor doesn’t work properly. Replace faulty motor now!
2. Car Battery & Cables – Check for faulty car battery and cables and replace now!
3. Diagnostic Tool - In order to detect the error, one needs high grade diagnostic tools. Visit us today to grab amazing deals.

For us our customers are everything, and that’s why we will help you to diagnose P0B41 code by mentioning some important symptoms below:

Common Symptoms

• Malfunction Indicator Light On
• Sluggish acceleration
• Affected fuel economy
• Lights and electrical components not working properly
• PCM and ECU faults

After understanding the symptoms and few common causes behind the OBD error code, we are here to help you out in understanding the ways and means to correct the issue. To solve any issue, you need to follow certain steps, and to solve OBD error code P0B41, you will need to undergo the following replacements:

• Replace the defective hybrid battery cut off switch harness
• Replace faulty battery current sensor
• Repair or replace the quirky car battery
• Rehabilitate the defaults in the hybrid battery cut off switch
• The malfunctioning hybrid battery cut off switch circuit should be repaired or replaced
• Check and repair the faults in the hybrid battery cut off switch circuit
• Perform proper service of the unsound hybrid battery

Apart from this, you might need to replace other damaged parts too like Electric Vehicle Battery, HV Battery, Auxiliary Battery, Powertrain Control Module, Diesel Fuel Injector, Exhaust System, Engine Control Module and more. You can easily find all these parts with us. Not only that you can get these parts shipped to your door free, if your cart value happens to exceed $99.

Do you wish to diagnose P0B41 error code easily? Here are some steps which you should follow in order to diagnose this fault code:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• On test driving, if the P0B41 code does not return soon, he will know that an erratic condition exits.
• But if the error returns instantaneously, he will check every components of the control module as well as the circuit like connectors, wires, harness, fuses etc for any possible fault.
• If any component is damaged, he will fix them right away.

• After performing this repair, he will inspect the transmission fluid as well as its level.
• If the level is below the manufacturer’s specification, it has to be refilled and if the fluid is murky or contaminated it needs to be replaced.
• Every time a repair work is carried out, make sure that the mechanic test drives the vehicle after every repair so that the diagnosis is successful. This can eventually help him to know as to where the error occurred.

Common Mistakes When Diagnosing the P0B41 Code

• PCM and ECU failure
• Wiring and connectors damaged, broken or short
• Hybrid battery failure