Error Code P0B31: What It Means & What To Do?

<<See All OBD Codes

The trouble code P0B31 can be explained as Hybrid Battery "D" Voltage Low. Are you experiencing sluggish performance and acceleration? Is there a problem with the engine performance and affected fuel economy? All this with lights keeping stayed on due to high voltage may be due to vehicle battery problems leading to OBD code P0B31 error getting stored in the PCM.

Do you want to know more about the P0B31 fault code? Don’t worry! Parts Avatar Canada is here at your service. The hybrid battery is being monitored by the engine control module. This trouble code would be set by the ECM when the hybrid battery would not be as per the specifications set by the manufacturer.

What causes this problem with the Hybrid Battery "D" Voltage Low?

• ECU and PCM failures
• Hybrid battery pack damaged
• Battery Interface Control Module faulty
• Hybrid battery pack harness opened or shorted
• Hybrid battery pack circuit poor electrical connection

1. Battery Current Sensor - Defective car Battery Current Sensor can be a major reason why P0B31 code depicts. So make sure to replace it online so that you don’t have to face any further issues.
2. Car Battery - If ECM the working properly and still OBD code P0B31 is triggering, then there must be some defects in Car Battery. Replace them as soon as possible.
3. Battery Coolant Pump - P0B31 code flashing? Get your Battery Coolant Pump inspected from a mechanic.
4. Engine Control Module - If everything is alright with Hybrid Battery, then there is surely some defect in Engine Control Module. Get it replaced before the situation gets worse.
5. Powertrain Control Module - P0B31 code can display due to some issues in the Powertrain Control Module. So it is very important to replace the Powertrain Control Module with us at equitable prices.
6. Hybrid Battery - Do you remember when was the last time you got your car Hybrid Battery checked up? A dirty Hybrid Battery can cause a lot of issues like displaying P0B31 code.
7. Electronic Control Unit - Are there some faults in your Electronic Control Unit? Don’t waste time and get them replaced or else P0B31 code can turn up.

For us our customers are everything, and that’s why we will help you to diagnose P0B31 code by mentioning some important symptoms below:

Common Symptoms

• Sluggish Acceleration
• Vehicle Engine not starting
• Electrical components not working properly
• Malfunction Indication Light On
• Increased exhaust emission and temperatures

It is very important to fix the fault code P0B31. So here are some ways with which you can correct this issue:

• Make sure to fix the defective car battery
• Fix the faulty hybrid battery pack switch
• Restore the flawed hybrid battery pack circuit
• Rehabilitate the defaults in the battery current sensor
• The malfunctioning hybrid battery should be repaired or replaced as per the need
• Repair or replace exhaust manifolds faults, if required
• Hybrid battery connectors and wiring replacement
• Check and replace oxygen sensor, if found faulty

To do all this, you will need few high quality auto parts such as Hybrid Battery, Hybrid Battery Pack, Hybrid Battery Voltage Sensor, Oxygen Sensor, Battery Cables, Battery Energy Control Module, Battery Cable, Battery Contactor Assembly, Battery Control Module, Engine Control Module, and Powertrain Control Module and so on. From where will you get them? From your local store? Well, why go there when you can order quality parts with us while sitting in the comfort of your home. So, just browse through our website and order your needed parts today.

Here are some steps which you should follow in order to diagnose this fault P0B31 code:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the solenoid or the control modules are not faulty, he will then retune the code and test drive the vehicle.
• Now when the car is taken out for a test drive, if the P0B31 code does not return soon, he will know that there is an existence of erratic condition.

Common Mistakes When Diagnosing The P0B31 Code

• There can be a failure in the battery contactor assembly
• Battery wiring and connector issues
• Powertrain Control Module faults
• Defaults in the battery energy control module