Guide To P0B27 OBD Error Code Solutions

<<See All OBD Codes

Are you experiencing sluggish performance and acceleration? Is there a problem with the engine performance and affected fuel economy? All this indicates towards the occurrence of OBD P0B27. OBD error code P0B27 relates hybrid battery “B” voltage. To know more about this error code and its related causes, correction and diagnosing steps take a look at the sections below.

Well, P0B27 OBD error code is an OBD-II trouble code that falls within one of those possible codes that indicate that your vehicle’s PCM (Powertrain Control Module) has detected some malfunctioning with the hybrid battery “B” voltage. In other words this error code will be set by your vehicle’s ECM when it detects that the Hybrid Battery 'B' Voltage Circuit signal is out of factory specifications.

What causes this problem with the Hybrid Battery "B" Voltage?

• Hybrid Battery Pack faulty
• Open or shorted harness to Hybrid Battery Pack
• Poor Electrical Connections to Hybrid Battery Pack

1. Battery Contactor Assembly - Defective battery contractor assembly can cause a lot of difficulties, so why not get it replaced at time? Buy new ones with us at PartsAvatar today.
2. Battery Control Module - OBD error code P0B27 flashing? There is a chance that your vehicle’s battery control module component (BCM) is damaged and is demanding for a quick change. So what are you waiting for? Buy a new one with us now.
3. Hybrid Battery Voltage Sensor - If you need hybrid battery voltage sensor to fix your car then we have a good news for you. We have in stock not only high end hybrid battery voltage sensor but we also have them for all makes and models. So what are you waiting for? Just dive into the pool of best auto parts today.
4. Battery Cable - A faulty Car Battery Cable can be troublesome. You can always rely on us as we have best auto parts for our customers.
5. Hybrid Battery Pack - If everything is alright with ECM/PCM and you still P0B27 flashing, then there is surely some defects with the Hybrid Battery Pack. Get it diagnosed and replaced before the situation gets worse.
6. Engine Control Module - Do you remember when was the last time you got your car’s ECM checked? A faulty engine control module can cause a lot of issues like displaying P0B27 code.
7. Powertrain Control Module - Are there some faults in your car’s Powertrain Control Module? Don’t waste time and get them replaced or else P0B27 code can turn up.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0B27 here:

Common Symptoms

• Light may stay on or work intermittently
• Sluggish Acceleration
• PCM faults
• Vehicle going into limp mode
• Reduced fuel economy

Here are some ways with the help of which you will be able to correct the OBD Code P0B27.

• It is essential to restore the flawed hybrid battery
• Repair or replace the quirky hybrid battery cut off switch circuit
• Carefully adjust the faults in the hybrid battery cut off switch
• The hybrid battery cut off switch harness should be restored to working order
• Recondition the non-functioning car battery
• It is necessary to perform proper service of the unsound battery current sensor
• Adjust the flawed hybrid battery cut off switch circuit

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade Hybrid Battery, Hybrid Battery Pack, Hybrid Battery Voltage Sensor, Battery Energy Control Module, Battery Cable, Battery Contactor Assembly, Battery Control Module, Engine Control Module, Powertrain Control Module and a lot more for our precious customers.

Here are some steps which you should follow in order to diagnose this fault code:

• This is a general type of error code which is diagnosed with the help of a scanner.
• The mechanic will insert a scanner to diagnostic port of the vehicle and recover the codes and freeze frame data.
• If he happens to find any additional error codes, he has to address them as well.
• Once it is done, he has to reset the vehicle, and then test drive to see if the error code appears.
• If the error code does not return, then there can be an erratic condition.
• Then the mechanic has to check the wires, connectors and other electrical components and quickly replace them if he finds them to be damaged or defective.
• Check for the damaged hybrid battery and its components for error. It the mechanic finds the fault in the connectors in relation to the battery, replace it immediately.
• Also check for the particular battery cells emitting high voltages and thus might need battery replacement as well.
• If all the components seems to work perfectly, inspect the PCM for faults and replacement along with reprogramming.

Common Mistakes When Diagnosing the P0B27 Code

Conducting a diagnosis is not as easy as it might seem, even the top notch mechanic can commit few errors. To avoid any of these misdiagnosis you need to follow the diagnostic steps with precision.

Make sure you check each and every part related to OBD error code P0B27 to make sure you are diagnosing the problem effectively, and there occurs no misdiagnosis. There might occur the following errors

• Wiring and connector issues
• Hybrid battery cells issue
• PCM and ECU issue