P0B1E OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0B1E can be explicated as Hybrid Battery Pack Voltage Sense "D" Circuit. It is important to know that the wrong battery voltage will affect the engine performance as well as the fuel economy. Also affected by the sluggish acceleration and the braking risk, the OBD code P0B1E error code gets stored in the PCM indicating problematic hybrid battery pack voltage sense "D" circuit issue.

The brighter you are, the more you have to learn! That’s why we are here to provide you more knowledge about the P0B1E trouble code. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.

What causes this problem with the Hybrid Battery Pack Voltage Sense "D" Circuit?

• Unlocked hybrid battery pack harness
• Some issues related to the hybrid battery pack
• Unsatisfactory electrical connection in the hybrid battery pack circuit

1. Car Battery Cable - A faulty Car Battery Cable can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Hybrid Battery - If everything is alright with PCM, then there is surely some defect in Hybrid Battery. Get it replaced before the situation gets worse.
3. Car Battery - P0B1E code can display due to some issues in the Car Battery. So it is very important to replace the Car Battery with us at equitable prices.
4. Electronic Control Unit - Do you remember when was the last time you got your car Electronic Control Unit checked up? A dirty Electronic Control Unit can cause a lot of issues like displaying P0B1E code.
5. Body Control Module Component - Poor Body Control Module Component can cause a lot of difficulties, so why not get it replaced at time?
6. Engine Control Module - Are there some faults in your Engine Control Module? Don’t waste time and get them replaced or else P0B1E code can turn up.
7. Powertrain Control Module - OBD Code P0B1E can appear because of faulty Powertrain Control Module. 

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0B1E here:

Common Symptoms

• Check engine light might come into signal

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0B1E:

• It is essential to restore the flawed hybrid battery
• Repair or replace the quirky hybrid battery pack circuit
• Carefully adjust the faults in the hybrid battery pack switch
• The hybrid battery cut off switch harness should be restored to working order
• Recondition the non-functioning car battery
• It is necessary to perform proper service of the unsound battery current sensor

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced bcm, battery connectors, battery terminal connectors, electronic control module and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

• A careful inspection of the vehicle is carried out by the mechanic with the help of a scanner.
• After this inspection, he will recover every stored codes in the vehicle as well as freeze frame data by inserting a scanner to the diagnostic port of the vehicle.
• He will store this information as it may help him with further diagnosis.
• After the codes are recovered, the vehicle is reset, test- driven to check for the occurrence of the error code.
• He will clearly know that an erratic condition has prevailed if the code does not return quickly.
• But if the code returns instantly, he will then start inspecting the transmission fluid for any leaks.
• Sometimes there might be some issues with the hybrid battery, which the mechanic will find during diagnosis. Sometimes, the hybrid battery pack itself can be defective which has to be checked for any damages.
• After this, the technician will visually inspect every wires, connectors, harness and fuses for any possible damages or defective and repairs them as needed.
• You must always know that once the error code is repaired, it is always the best idea to test drive and check the vehicle if the error code appears again which can help the technician to know the area of fault and as to how the error code occurred in the vehicle.
• This can easily help the mechanic to fix the error code.

Common Mistakes When Diagnosing The P0B1E Code

• Battery contactor assembly might start failing
• Some issues related to the battery energy control module