P0B18 - OBD Trouble Code

<<See All OBD Codes

What does P0B18 error code refer to? Does your hybrid battery pack malfunction? Is there any opening or short circuit in the hybrid battery pack? Then it’s more likely that the P0B18 error code is stored in your vehicle. The engine control module carefully looks after the hybrid battery pack voltage sense ‘B’ circuit. The ECM will set the P0B18 error code in the vehicle if the hybrid battery pack voltage sense ‘B’ circuit does not meet the necessary specification.

The P0B18 diagnostic error code is generally known as the hybrid battery pack voltage sense ‘B’ circuit intermittent/ erratic. There are about 300 battery cells in each hybrid battery pack. The voltage that is available in each cell group is conveyed to the battery control module or the hybrid powertrain control module with the help of a voltage monitor that is attached to each group. If the voltage of the cell group is less than that of the expected voltage, then the P0B18 error code will be set.

What causes this problem with the Hybrid Battery Pack Voltage Sense "B" Circuit Intermittent /Erratic?

• The improper functioning of the hybrid battery pack.
• You might find the harness of the hybrid battery pack to be opened or the circuit might be shorted.
• The electrical connection might be bad in the hybrid battery pack.

1. Hybrid Battery Pack - Is the hybrid battery pack broken? Are you looking for a replacement? Get it from Parts Avatar at the best prices.
2. Hybrid Battery Pack Current Sensor - The defective hybrid battery pack current sensor must be replaced immediately so that the P0B18 error code is avoided.
3. Battery Cables - Get the replacement for a damaged battery cable at affordable cost from Parts Avatar.
4. Battery Current Sensor - Examine the battery current sensor for any possible damages. If you come across any defects, replace it immediately
5. Battery Control Module - The vehicle will function normally if the faulty battery control module is replaced instantly.
6. Engine Control Module - The easiest way to get rid of the P0B18 error code is to replace the damaged engine control module as soon as possible.

Have you ever wondered why it is so important to know the symptoms of the problem? Well, it is extremely essential to know the symptoms of the problem in order to detect it. Keeping this in mind, let’s throw some light on a few common symptoms of OBD error code P0B18

Common Symptoms

• Flashing of the engine light or the service engine will indicate you with a warning light.

Once you know the symptoms of your vehicle’s problem, it becomes easy to detect it and get started with solving it. So, next on our list is a few common steps to correct this issue with your vehicles.

• Replacement of the damaged hybrid battery pack/ hybrid battery pack current sensor.
• Defective engine control module needs fixation.
• The damaged battery cables and battery control module needs to be repaired.

If you need parts to fix this issue, you no longer need to search for them. We at PartsAvatar Canada have an extensive range of auto parts like body control module, battery connectors, engine control module (ECM), BCM, a power control module in stock from you, ranging from all replacement parts to all interior and exterior parts

Here are some steps which you should follow in order to diagnose this fault code:

• In order to successfully diagnose this error code, you can use an OBD-II scanner (or code reader), a digital volt/ohmmeter, and an oscilloscope.
• You can also use several other tools, to successfully diagnose this error.
• Before you proceed to remove components that are related to emission check with local state and federal laws.
• One of the definite sign you will see is that there will be steam or smoke coming out from under the hood.
• The timing of the ignition may be set wrongly which needs proper adjustment.
• At times when you look under the hood, you might find the drive belt to appear very loose which has to be tightened or it should be completed changed with a new one.
• You will find the cylinder head gasket to be broken if you come across any fluid at the bottom of the car.
• You can confirm the cylinder head gasket to be broken when there is some form of billowing smoke coming out from the exhaust system.
• The OBD-II error code P0B18 can also be activated by the issues that were already present down the line.
• For instance, the car may start overreacting due to a dirty MAF sensor in its fuel trim adjustments.
• The final result is that you will find the oxygen sensors to experience fuel mixture problems.

Common Mistakes When Diagnosing the P0B18 Code

The mechanic may look for issues in the components like battery cable and hybrid battery pack current sensor, and so on whereas the actual fault may lie with the battery contactor assembly and battery energy control module which has to be changed.