P0B12 OBD Error Code: Problem & Solutions
OBD Code P0B12 - Hybrid Battery Pack Current Sensor "B" Circuit Intermittent/Erratic
Are there any symptoms for P0B12 error code? What is the
diagnostic process? How the error code gets stored in the vehicle? Don’t worry.
Here’s the solution. Malfunctioning of the battery current sensor is generally
known as the hybrid battery pack current sensor "B" circuit
intermittent/erratic. A current sensor is available in the high voltage battery
pack which is fixed to the negative battery cable. The charging and discharging
of the battery pack is informed to the battery control module by the sensor.
The P0B12 error will be set in the vehicle if the battery control module
identifies the malfunctioning of the sensor circuit.
Learn More About OBD Error Code P0B12
The engine control
module also shortly known as ECM will carefully look after the hybrid battery
pack current sensor 'B' circuit. The error code will be set in the vehicle by
the engine control module (ECM) if the signal of the hybrid battery pack
current sensor 'B' circuit fails to meet the factory specifications as
mentioned.
What causes this problem
with the Hybrid Battery Pack Current Sensor "B" Circuit Intermittent
/Erratic?
- The hybrid battery pack might be defective.
- There might be an opening in the hybrid battery pack or the circuit might be shorted.
- The electrical connection of the hybrid battery pack circuit might appear to be weak.
Replace/Repair These Parts To Fix OBD Code P0B12
- Hybrid Battery Pack - The
damaged hybrid battery pack has to be replaced to avoid the P0B12 error code.
- Hybrid Battery Pack
Current Sensor - Get the replacement for your
faulty hybrid battery pack current sensor from Parts Avatar at best prices
online.
- Battery Cables - Is
the battery cable faulty? Get the replacement for your defective battery cables
from Parts Avatar at an affordable cost online.
- Battery Current
Sensor - The faulty battery current sensor
needs immediate fixation for the engine to run smoothly.
- Battery
Control Module - Is the battery control module damaged? Get the replacement for your
damaged battery control module from Parts Avatar at the best prices online.
- Engine Control
Module - The right replacement for your faulty
engine control module can be found at Parts Avatar at best prices.
Symptoms Of OBD Error Code P0B12
Our main motive is to
achieve customer satisfaction and that’s why we will help you to diagnose P0B12
code by mentioning some major symptoms below:
Common Symptoms
- The warning light of the service engine or the engine light might
be flashing.
How To Correct P0B12 Hybrid Battery Pack Current Sensor "B" Circuit Intermittent/Erratic
Have a look at some ways
with which you can correct the P0B12 code:
- The hybrid battery pack/ hybrid battery pack current sensor has to
be changed.
- Replacing the faulty engine control module.
- Repairing the damaged battery cables and battery control module.
Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of body control module, battery connectors, engine control module (ECM), BCM, power control module and a lot more. We are sure that now all your issues would be resolved.
Easy Diagnosis Of Engine Error OBD Code P0B12
It is essential to diagnose
this fault code. Here are some steps which a mechanic should follow for
diagnosing the problem that triggered a P0B12 code to be stored:
- Initially, the mechanic will use a scanner to check for the stored
error codes.
- He will now connect a scanner to the diagnostic port of the
vehicle and recover the stored codes and freeze frame data.
- These data are usually obtained as they can help him with further
diagnostic process.
- Firstly the mechanic will check the hybrid battery pack as well as
the hybrid battery pack current sensor. If there are any faults or defects, it
will be repaired.
- If there are no errors, then the components like battery cables,
battery control module, battery current sensor, etc will be visually checked
and examined to see if there are any faults or stored error codes.
- If there are any errors, the mechanic will repair them
immediately.
- As a final step, the mechanic will inspect the engine control
module if it is broken or damaged. If it is broken, the mechanic will carry out
the repair process.
- After every component is repaired and when the diagnosis process
is properly done, the mechanic has to test drive your vehicle again see if the
engine light turns on or if the error code still appears.
- This can help him to locate the area as to where the error has
been stored in the vehicle.
Common Mistakes When
Diagnosing the P0B12 Code
- Defective high voltage battery assembly.
- An issue with the battery current sensor.
- Faulty battery control module.