Guide To P0AB0 OBD Error Code Solutions

<<See All OBD Codes

How does the P0AB0 error code gets stored in the vehicle? How can this error code be removed? The improper functioning of the high voltage control module is generally known as the hybrid battery pack air temperature sensor "A" circuit intermittent/ erratic.

The battery pack air temperature sensor will tell the high voltage control module about the temperature of the ambient air that is made available in and around the hybrid battery pack. If an incorrect signal is detected from the hybrid battery pack air temperature sensor, then the high voltage control module will find it and the error P0AB0 will be set. In many vehicles, this temperature sensor acts as a part of the battery pack assembly.

The HV battery assembly is made available in the intake air temperature sensor. As the value keeps changing, the value of resistance will also change in the intake air temperature. Both the intake air temperature sensor and battery temperature sensor will have similar characteristics. In order to correct the air flow speed of the battery blower assembly, the signal from the intake air temperature sensor will be utilized by the battery ECU.

What causes this problem with the Hybrid Battery Pack Air Temperature Sensor 'A' Circuit Intermittent/Erratic?

• The HV battery assembly might be broken.
• The HV battery assembly harness might either be shorted or you might see an opening in the circuit.
• The very poor electrical connection in the HV battery assembly circuit.
• Broken battery ECU.

1. Engine Control Module - Conditions of misfire indicates that the ECM is faulty which needs replacement as soon as possible.
2. Powertrain Control Module - Does your engine turn off without any reason? Then it’s a high time to replace your PCM as it can be faulty.
3. HV Battery Assembly - A damaged or defective HV battery assembly has to be replaced quickly to avoid troubles in the system.
4. Battery Cables - Facing troubles with your faulty battery cable? Then it’s high time to get a new battery cable from PartsAvatar.
5. Battery - The engine will be sluggish when you try to start the vehicle. This indicates that the battery is broken or faulty and needs a replacement quickly to avoid P0AB0 error

Willing to know some common symptoms of OBD Code P0AB0? Your wish is our demand. Have a look at them below:

Common Symptoms

• Fuel consumption might be high.
• Low engine performance.
• Indications of a misfire.
• You will notice either of the lights, that is the engine light or the warning light of the service engine turned on.

We have listed out some ways which would help you to correct the occurrence of OBD Code P0AB0. They are mentioned here as follows:

• Faulty hybrid battery pack/ hybrid battery pack assembly has to be fixed.
• Defective powertrain control module and engine control module needs fixation.

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of priced HV battery assembly, HV battery assembly harness, battery ECU and many more. Now all your problems would vanish within no time.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0AB0 code to be stored:

• One of the main reasons for the P0AB0 error code is because of the engine light which has failed.
• Firstly, the mechanic will check the gas cap for the faulty engine light.
• He will visually inspect the gas cap for any possible damages or cracks. If there are no damages, he will pull over and re tighten the gas cap.
• After making sure that there are no damages in the gas cap, the mechanic will test drive the vehicle and see if the engine light still appears.
• Another reason as to why this error code appears is because of faulty hybrid battery pack/ hybrid battery pack assembly.
• The mechanic will look after these components very carefully and replace them if they are damaged.
• After this, the mechanic will check the battery cables, battery current sensor and battery control module for any possible damages and fix if any issue arises.
• As a very rare case, the mechanic will carefully check for any faults in the engine control module/ powertrain control module and replace them if they are found to be damaged.
• After carrying out this diagnosis, the mechanic will reset the vehicle for any error codes and test drive the vehicle again to see if the error code still appears and the engine light turns on.

Common Mistakes When Diagnosing the P0AB0 Code

• High voltage battery assembly might be broken.
• Problematic wires.
• Engine oil level is decreased.
• Faulty high voltage control module