P0A95 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0A95 can be defined as High Voltage Fuse. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model. The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile.

It is always good to learn more! That is the reason why we are here to help you out in gaining more knowledge about the P0A95 error code. This code is a generic trouble code, meaning it applies to all vehicles equipped with the OBD-II system, especially those made from 1996 up to present. It’s also more common among Audi, Citroen, Chevrolet, Ford, Hyundai, Nissan, Peugeot, and Volkswagen vehicles.

What causes this problem with the High Voltage Fuse?

• Imperfect high voltage battery assembly
• There can be inoperative high voltage fuse
• High voltage service plug might not be connected properly
• There can be distorted battery ECU

1. Hybrid Battery - Did your mechanic just found out that there is some fault in the Hybrid Battery? Buy top notch Hybrid Battery from us at economical prices.
2. HV Fuse - A broken HV Fuse can cause a lot of issues. It would be nice if you get it replaced on time.
3. Electronic Control Unit - Everything is fine with the engine control module and still OBD code P0A95 flashing? Then there is definitely some fault with the Electronic Control Unit. Get it checked and replace if needed.
4. Engine Control Module - Engine Control Module is an important car part which should never be neglected. May be there is some fault in it due to which P0A95 code may start flashing.
5. Powertrain Control Module - A faulty Powertrain Control Module can be troublesome. You can always rely on us as we have best auto parts for our customers.

Our main motive is to achieve customer satisfaction as for us our customers are everything and that’s why we will help you to diagnose P0A95 code by mentioning some major symptoms below:

Common Symptoms

• The service engine soon warning light can start appearing
• High voltage system might not function at all

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0A95:

• You must fix the defective battery assembly
• Make sure to mend the faulty high voltage fuse
• It is essential to restore the flawed high voltage service plug
• Repair or replace the quirky battery ECU

However, if you face any issue then we have stocked a wide range of best priced High Voltage Fuse, Interlock Switch, hv battery assembly, hv service plug, battery plug, battery ecu and more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

• A careful inspection of the vehicle is carried out by the mechanic with the help of a scanner.
• After this inspection, he will recover every stored codes in the vehicle as well as freeze frame data by inserting a scanner to the diagnostic port of the vehicle.
• He will store this information as it may help him with further diagnosis.
• After the codes are recovered, the vehicle is reset, test- driven to check for the occurrence of the error code.
• He will clearly know that an erratic condition has prevailed if the code does not return quickly.
• But if the code returns instantly, he will then start inspecting the transmission fluid for any leaks.
• In some cases, the transmission fluid can be dirty or it can be contaminated.
• The area of leak will be found and fixed. The dirty or contaminated fluid should be replaced with clear fluid.
• Sometimes the fluid may be not be filled at the correct level, which the mechanic will find during diagnosis. Sometimes, the solenoid itself can be defective which has to be checked for any damages.
• After this, the technician will visually inspect every wires, connectors, harness and fuses for any possible damages or defective and repairs them as needed.
• You must always know that once the error code is repaired, it is always the best idea to test drive and check the vehicle if the error code appears again which can help the technician to know the area of fault and as to how the error code occurred in the vehicle.
• This can easily help the mechanic to fix the error code.

Common Mistakes When Diagnosing The P0A95 Code

Common mistakes while diagnosing this trouble code are unnecessary and expensive replacements which usually happen when one don’t follow all the steps carefully. In this code usually people replace high voltage fuse without even properly diagnosing it.

The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.