P0A8D - OBD Trouble Code

<<See All OBD Codes

Do you want to know the causes, symptoms and diagnostic procedure for P0A8D error code? Are you confused as to how this error code got stored in your vehicle? Don’t worry. Just read through to know more about this error code. The 14-volt power control module is looked after by the engine control module (ECM), which sets the OBD error code P0A8D in the vehicle if it fails or does not operate correctly as per factory stipulations.

The improper functioning of the low voltage system is commonly referred to as the 14-volt power module system voltage low. The 14-volt power module is also known as the accessory DC power module, carefully looks after the current to the voltage system that is low. The voltage system that is low will be disabled when the 14-volt power control module finds out that the voltage is too low and finally stores the P0A8D error code in the vehicle.

What causes this problem with the 14 Volt Power Module System Voltage Low?

• 14-volt power module might be broken.
• 14-volt power module harness is either shorted or the circuit might be open.
• The electrical connection of the 14-volt power module circuit might be poor.
• 14-volt power module needs a quick software update.

1. 14 Volt Power Module - A faulty or defective 14-volt power module will make the P0A8D error code to get stored in your vehicle. If you want to avoid this error code then replace the damaged 14-volt power module.
2. 14 Volt Power Module Harness - Visually inspect the 14-volt power module harness for any damages or cuts. If the joints are damaged, get the replacement for your 14-volt power module harness from Parts Avatar at best prices online.
3. 14 Volt Power Module Software - Updating the software of the 14-volt power module is very important as it can prevent the P0A8D error code from getting stored in the vehicle.
4. Engine Control Module (ECM) - An easy way to avoid or get rid of the P0A8D error code is to replace the faulty or defective engine control module by getting the correct replacement from Parts Avatar.
5. Car Battery - Does your engine light keep flashing? Then it’s more likely that the battery is damaged. Get the replacement for your car battery at affordable cost from Parts Avatar.

Interested in knowing the symptoms to OBD code P0A8D? If yes, then you have arrived at the right place. We at Parts Avatar have listed out few common symptoms associated with 14-Volt Power Module System Voltage.

Common Symptoms

• The improper functioning of the system due to low voltage.
• The light of the engine might always be on.

Have a look at some ways with which you can correct the P0A8D code:

• Substituting the 14-volt power module.
• The software of the 14-volt power module has to be updated.
• Altering the defective engine control module (ECM).
• Faulty batteries have to be changed.

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of 14-volt power module, 14-volt power module harness, 14-volt power module software, engine control module (ECM), battery and many more. Now all your problems would vanish within no time.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• It is very easy to diagnose the P0A8D error code where the mechanic will use a scanner to see if there are any errors in the vehicle. Additionally, he will attach a scan tool to the diagnostic port so that every freeze frame data and stored codes can be recovered which can be helpful for further diagnosis.
• For an advanced diagnostic process, the mechanic will use Autohex- an advanced tool which can help him with diagnostic procedure.
• To begin with, the mechanic will check the 14-volt power module harness. If the harness is damaged or detached, the mechanic will join them or the damaged part will be repaired. After this, the mechanic will check for the proper functioning of the 14-volt power module.
• If the 14-volt power module is damaged, the system will not function properly. So the component will be repaired.
• Finally, the engine control module and the batteries will be carefully checked if they are damaged. This is a very rare case, but if these components are found to be damaged, then they will be replaced as soon as possible.
• As a final step, the mechanic will reset the error codes so that he can test drive the vehicle test driving the vehicle will help the mechanic to know if the error code is disappeared or not. Also, it will help the mechanic to find out the exact location as where the error occurred.

Common Mistakes When Diagnosing the P0A8D Code

• Malfunctioning of the engine control module (ECM).
• There might be some problem with batteries.
• Ignorance of software updates.